Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for St. Paul Homeowners
A chimney sweep in St. Paul is a working appointment, not a courtesy visit. This is a city where a fireplace or a gas insert runs five months of the year, and the creosote, soot, and blocked flues that build up over a long heating season are exactly the sort of thing you can’t see from the hearth. What you need is a technician who climbs up, runs a camera down, and tells you plainly what’s there – then shows you the photos so you can decide for yourself. Our technicians have up to 11 years of experience, we answer 24/7 at (866) 942-6061, and we can schedule same-day sweep appointments around St. Paul when the calendar allows. Booking happens by written estimate, so nothing gets agreed until you know what the job costs.

Chimney Sweep Services
Chimney Sweep Services cover the full scope of keeping a flue clear, safe, and working the way it was built to – sweeping, inspection, and repair handled by the same people. You need them whenever the flue hasn’t been looked at since appliances changed, the last owner didn’t leave a record of the work, or smoke is backing up on a cold start. Tundra Chimney Sweep sweeps wood-burning and gas appliance flues, inspects with a camera, and issues a written report; typical sweeping runs $150-$350 depending on liner type, access, and how much soot has accumulated.
What a Standard Sweep Covers
A standard sweep brushes the full flue length, clears the smoke shelf and damper, vacuums the firebox and hearth, and checks the cap and crown from the roofline. We run a camera to confirm the flue is actually clear afterward, not just brushed. The written report tells you what we found and what, if anything, needs attention.
When the Flue Has Never Been Touched
An un-swept masonry flue in an older St. Paul house often carries a heavy glaze of hard creosote that a light brushing won’t lift. We inspect first, tell you what we see, and only recommend a rotary treatment or resurfacing when the video shows it’s needed. Nothing about that decision is made on the roof without evidence you can watch.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the deeper version of a routine sweep, where soot, creosote, and ash are removed from the flue, smoke chamber, and firebox with vacuums and rotary tooling rather than a hand brush alone. It’s the right call after a heavy burn year, after oil-to-gas conversion, or when the draft just doesn’t feel right. We use HEPA vacuums soot-side, so the room doesn’t end up smelling like the inside of a stove. Chimney cleaning in St. Paul typically runs $150-$350, more when the flue has glazed creosote that requires rotary removal.
Why Vacuum Control Matters Indoors
Loose soot travels. The whole job is sealed with a drop cloth and a vacuum attached at the firebox, and the technician work top-down and bottom-up so nothing drifts into the living space. When the sweep is done, the hearth goes back the way it started.
Creosote Grades and What They Mean
Creosote is graded by how hard it is and how easily it ignites. Grade 1 brushes off easily; Grade 2 is sticky and needs more attention; Grade 3 is glazed and hard, and a light brushing won’t touch it. We show you the difference on camera so you know which grade you’re dealing with.
Fireplace Cleaning
Fireplace Cleaning covers the firebox, damper, glass, grate, and hearth of an open wood-burning fireplace, and it’s the part of a sweep that actually affects how the room smells and draws. You want it done when ash piles up faster than the fire burns it away, when there’s a smoky smell in warm weather, or when the glass or firebox bricks are coated in soot. We clean by hand and vacuum, check the firebox mortar and damper operation, and note anything that looks soft or cracked. Fireplace cleaning in St. Paul typically runs $150-$350 depending on how much soot is on the firebox and whether the damper needs adjustment.
Smoke Smell in Summer
The reverse draft that carries smoke smell back into the house in warm months usually means creosote or soot is sitting in the smoke chamber. Cleaning it resets the pressure balance. If a cleaning doesn’t fix it, we tell you so before anyone suggests masonry work.
Damper and Glass Care
A damper that won’t seat properly lets heat go straight up the flue all winter. We check operation, look for warping, and clean the glass on doors that have it. If a part needs replacing, we name it and let you decide.
Chimney Services
Chimney Services means the sweep, the repair, and the inspection all come from one place – which matters because a flue is one system, not three separate appointments. You need this broader scope whenever the sweep turns up something the sweep alone can’t fix, or when a real estate transaction, an insurer, or an appliance change requires documented condition. Tundra Chimney Sweep sweeps, inspects with a camera, and repairs masonry and liner issues with materials like HeatShield resurfacing and DuraFlex liner systems, specified for cold-weather performance. Sweeps start around $150-$350; repair work is priced per job by the written estimate.
One Report, One Crew, One Bill
Nobody wants a sweep who hands off to a separate inspector who then hands off to a mason. We inspect, document, and write the estimate ourselves so the findings don’t get lost in translation. You get a single report and a single price.
Real Estate and Insurance Documentation
Inspectors and insurers want a written record: what was checked, what was found, what remains. We provide that report in writing with photos. It’s readable, not a marketing piece, and it holds up when someone else has questions about the flue.
Chimney Sweep Certified
Chimney Sweep Certified means the technician you let into your house was trained and evaluated on the actual work – sweeping technique, camera inspection, liner evaluation, and safety – and the certification comes from an industry-recognized body. It matters because anyone with a brush can call themselves a sweep, and the damage from a badly brushed flue or a missed crack shows up later. Tundra Chimney Sweep technicians hold industry certifications and have up to 11 years of experience; a certified sweep appointment in St. Paul typically runs $150-$350, which includes the camera inspection and the written report.
What Certification Actually Covers
Certification isn’t a sticker. It means the technician has been tested on the physical work of sweeping and inspecting flues, and on the standards that govern liner evaluation and safety. We treat that as a floor, not a ceiling.
Why It Matters in an Older House
St. Paul has a lot of pre-war housing stock with masonry flues that were built for coal and re-purposed for wood or gas over the decades. Untrained eyes miss the changes. Certified eyes look for them first.
Gas Fireplace Cleaning
Gas Fireplace Cleaning services the firebox, logs or glass, burner, and venting of a gas appliance, and it’s the service gas owners most often forget exists. It’s due when the flame has gone yellow or lazy, when the glass is fogged, when you smell gas on a cold start, or when the unit hasn’t been serviced since it was installed. We clean the burner and air shutter, check the vent termination, and confirm the cap and flashing are intact – Famco caps and terminations are the fittings we use when a replacement is needed. Gas fireplace cleaning in St. Paul typically runs $150-$350 depending on the unit and how much of it is accessible.
Yellow Flames and Lazy Draft
A healthy gas flame is blue. Yellow or orange indicates incomplete combustion, and a lazy draft is often a blocked vent or a cap that’s rusted shut. We check both before anything else, because that’s a carbon monoxide question, not a cosmetics question.
Venting and Termination Checks
Gas appliances rely on a clear, correctly-fitted termination. We look for bird nests, ice, animal screens, and loose flashing – all of which interfere with draft. If a cap needs replacement, we’ll specify one and explain why.

Chimney Maintenance
Chimney Maintenance is the annual look that keeps a flue from quietly deteriorating between sweeps – a scheduled sweep and inspection, plus proactive checks on the cap, crown, flashing, and firebox that catch small problems before they cost real money. It’s due once a year for most wood-burning homes in St. Paul, and more often for heavy burners or oil appliances. Tundra Chimney Sweep schedules maintenance around the heating season and documents each visit so you can see the change over time. A maintenance sweep typically runs $150-$350; repair items found during the visit are quoted separately and never bundled into the same invoice without your approval.
Timing the Annual Visit
Late summer or early fall is when most homeowners schedule, because a sweep before the first hard freeze is easier than a repair in January. The exact month matters less than the consistency. Book it once, track the report, and the flue tells you what it needs.
What Gets Checked Beyond the Flue
The cap, crown, flashing, and firebox masonry all get looked at during a maintenance visit. Small cracks in a crown become water intrusion, which becomes freeze-thaw damage, which becomes a liner job. Catching it at step one is the whole point.
Brands We Service
We work with Olympia Chimney flexible liner systems because they’re built to flex around offsets in old masonry flues without collapsing, and they hold up under sustained heat cycling through a full Minnesota winter. We also install Famco caps and terminations, which matter here because a fitted cap is what keeps rain, ice, and animals out of a flue year round. When a masonry flue has deteriorated but doesn’t need a full reline, we resurface with HeatShield, which spares the homeowner the demolition cost of pulling the old liner out.
On the heavier end, we install DuraFlex liner systems for oil-to-gas conversions and oversized masonry flues – the jobs many sweep-only outfits decline because they require sizing and fitting expertise. Copperfield components round out the material list where they’re the right fit for a specific installation. Whether you have Olympia Chimney, Famco, HeatShield, DuraFlex, Copperfield, Gelco, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Strong smoky smell in warm weather. Reverse draft pushing soot smell into the house usually means creosote is sitting in the smoke chamber. It’s a low-cost fix early and a much bigger job if left.
- Smoke rolling back into the room on a cold start. This is often a blocked flue, a failed cap, or a draft problem that a sweep will find. If it happens twice, it’s a call, not a habit.
- Visible soot or black staining on the firebox face or above the damper. Staining means the flue isn’t drawing properly and combustion byproducts are escaping into the room. That’s an air quality concern, not a cosmetic one.
- Water stains, rust, or crumbling mortar near the cap or crown. Water intrusion is the leading cause of masonry chimney failure in cold climates. A cracked crown or a loose cap lets it in and freeze-thaw does the rest.
- Yellow flame on a gas appliance or a soot film on the logs. This points to incomplete combustion, which can produce carbon monoxide. Shut the appliance off and have it looked at before it runs again.
Our Process, Step by Step
- 1
Walk-through and appliance check. We start indoors, look at the firebox, damper, and appliance, and note what type of flue we’re dealing with. This tells us what tooling the job needs before anything is opened up.
- 2
Sealed sweep with vacuum control. We set up a sealed work area with a HEPA vacuum at the firebox, then brush or rotary-clean the flue from bottom to top. Soot stays in the machine, not the room.
- 3
Camera inspection. A full-length camera run gives us a real look at the liner, offsets, and termination. Photos get captured to the report, and we can show them to you on the spot if you’re home.
- 4
Written report and photo documentation. Every finding goes into a written report you can read later, share with an insurer, or hand to a buyer’s inspector. It states the condition of the flue and what, if anything, we’d recommend.
- 5
Estimate for any repair work. If repairs are needed, we name the product line, say why it’s the right fit, and price the work per job. You approve before anyone starts, and no work happens on the same invoice without that approval.
How Much Does Chimney Sweep Cost in St. Paul?
Most chimney sweep appointments in St. Paul land between $150 and $350. A typical standard sweep for a wood-burning fireplace runs $150-$250. A deeper cleaning with rotary tooling on heavy creosote runs $250-$350, and gas fireplace cleaning sits around $150-$250 depending on the unit. Repair work – HeatShield resurfacing, liner installation, cap replacement, crown repair – is quoted per job based on what the camera shows, and there’s no fee added for the estimate itself.
What affects the price: liner type (masonry flues with offsets take longer than straight stainless), how much soot and creosote have accumulated, roof access and pitch, and whether the job includes a gas or oil appliance that needs its venting checked separately. A flue that’s never been swept since a prior owner lived in the house almost always runs toward the higher end of the range, because the first visit is part sweep and part diagnostic.
How to avoid overpaying: ask for the camera findings before anyone quotes a repair, and ask whether the work can safely wait until next season. Any technician should be able to tell you what’s urgent and what’s not. If a recommendation arrives without photo evidence, that’s your cue to ask for it. We don’t quote liner or masonry work without showing you what we found.
What’s included in a free estimate: the walk-through, the camera inspection, and a written report with photos and a per-job price. No service-call fee, no diagnostic fee, no trip charge. Call (866) 942-6061 for an exact quote – estimates are free.
Our Service Area Near St. Paul
We book chimney sweep appointments throughout St. Paul and the surrounding east-metro neighborhoods – Highland Park, Macalester-Groveland, Como, Summit Hill, and North End, along with South St. Paul, Maplewood, North St. Paul, Oakdale, Vadnais Heights, Inver Grove Heights, White Bear Lake, Woodbury, Shoreview, Eagan, and Lake Elmo. Scheduling is Sunday through Friday with fast dispatch from 7am to 7pm, and we answer the phone through the night. For a same-area chimney sweep across the river, our chimney sweep covers South St. Paul, and the chimney sweep team handles Maplewood and points east.
Serving St. Paul, MN – Our Local Coverage Area
We serve St. Paul and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in St. Paul
A chimney sweep is a trained technician who cleans soot, creosote, and blockages out of a flue and inspects the system for safety and performance. A proper sweep includes a camera inspection and a written report of condition, not just a brushing. In St. Paul, that means checking masonry liners, appliance venting, and the cap and crown, since all three take a beating through the heating season. Call (866) 942-6061 for an exact quote – estimates are free.
A standard sweep runs about 45 minutes to an hour and a half, depending on liner type and how much soot is present. A first-time cleaning on an older flue with heavy creosote can take longer, and a gas appliance check adds time for venting and burner work. We schedule the appointment to allow for the full job, not a rushed version. Call (866) 942-6061 for an exact quote – estimates are free.
Chimney sweeping in St. Paul typically costs $150-$350, with standard sweeps toward the lower end and deep cleanings or gas appliance work toward the upper. Any repair work found during the sweep is quoted per job by the written estimate, with photos of what we found. There’s no service-call fee or diagnostic charge. Call (866) 942-6061 for an exact quote – estimates are free.
Yes. We install and service Olympia Chimney liners and DuraFlex flexible liner systems, including the technically demanding jobs like oil-to-gas conversions and oversized masonry flues that many sweep-only companies pass on. We also work with Famco caps and terminations, HeatShield resurfacing, Copperfield components, and Gelco fittings where they’re the right material for the job. Named brand or otherwise, we can inspect and service the system. Call (866) 942-6061 for an exact quote – estimates are free.
Same-day appointments are available in St. Paul when the schedule allows, and we answer the phones 24/7. Fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. Call (866) 942-6061 for an exact quote – estimates are free.
Yes, our workmanship is backed by a satisfaction guarantee, and the specifics of coverage on any installation are spelled out in the written estimate before work begins. Brand-level warranties from Olympia Chimney, DuraFlex, Famco, HeatShield, and Copperfield apply to those components separately. We’ll walk you through what covers what so there’s no mystery after the job. Call (866) 942-6061 for an exact quote – estimates are free.
Clear the hearth and the floor in front of the fireplace, move anything breakable out of the way, and let us know about pets so we can keep them out of the work area. Don’t burn for 24 hours before the appointment. Have any prior inspection reports or appliance manuals handy if you have them, and tell us about a recent appliance conversion so we inspect for the right things. Call (866) 942-6061 for an exact quote – estimates are free.
Schedule Your Chimney Sweep Service in St. Paul Today
If the flue hasn’t been seen this season, book a sweep before the long burn starts. We schedule Sunday through Friday, we answer 24/7 at (866) 942-6061, and the estimate is free and no-obligation. You’ll get camera findings, a written report, and a plain-spoken price on any repairs. Nothing gets done without your approval.
Written by the team at Tundra Chimney Sweep.