Chimney Repair in Burnsville, MN | Tundra Chimney Sweep

Chimney Repair in Burnsville - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Burnsville

If your chimney is pulling away from the siding, spalling brick across the driveway, or you just bought a Burnsville split-level and don’t trust what’s behind the chase, we can help. We handle chimney repair across Burnsville with a camera-first approach: nothing gets recommended until you’ve seen the footage yourself, and the written estimate sets the final price. Our technicians have up to 11 years of experience, and we specify repairs for the freeze-thaw load this region actually delivers, not mild-condition use. Call (866) 942-6061 for a free estimate on any repair scope in Burnsville.

Call (866) 942-6061

Why Burnsville Homeowners Call Tundra Chimney Sweep for Chimney Repair

Burnsville has a particular chimney problem, and we know it well. The city’s 1960s to 1980s suburban homes are packed with original masonry fireplaces and early prefab inserts built for ambiance, not efficiency. After more than 40 years of freeze-thaw cycles, many have spalling crowns, cracked flue tiles, and rusted dampers hidden behind the siding. What a homeowner calls a chimney sweep here is really a structural inspection wrapped in a sweep, and we treat it that way.

That local knowledge is why Burnsville homeowners call us back. Technicians working the 55337 and 55306 ZIP codes know that many split-levels vent the furnace and water heater into the same exterior chimney as the fireplace, so a simple cleaning can turn into a multi-flue safety check. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, so a repair concern gets addressed on the schedule you need. We work with professional-tier product lines including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we use each one because the material fits a specific job, not because a catalog said so.

We can also work with your insurer when a repair needs documentation, and we’ll put what we find in writing. Nothing is recommended without camera evidence you can see for yourself.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Liner Installation in Burnsville

Chimney Liner Installation in Burnsville usually comes down to one question: are the original clay tiles still doing their job? In 1960s-70s split-levels and ramblers, cracked and spalled flue tiles are common after decades of freeze-thaw, and a liner is the repair that restores safe venting without tearing the chimney down. A typical liner job for a Burnsville home runs $2,800 – $5,500, with the exact figure set by the written estimate after we’ve run a camera through the flue.

When a Liner Makes Sense

If the camera shows broken tiles, gaps at the joints, or a flue that was never sized for the appliance now connected to it, a liner is the correct fix. HeatShield resurfacing can sometimes restore deteriorated clay without full removal, which keeps cost down. When the damage is too widespread, a DuraFlex flexible liner gives you a continuous, correctly sized flue from top to bottom.

Separating Shared Flues

Burnsville split-levels that share one exterior stack between the fireplace, furnace, and water heater often need the flues properly separated and sized. That’s a safety issue, not a comfort upgrade. We check the smoke chamber and damper before the firebox goes back into service.

Chimney Flashing Repair in Burnsville

Chimney Flashing Repair in Burnsville is one of the most common fixes we make on older homes, because flashing and crowns fail before the masonry itself does. On a 40-year-old rambler, the flashing where the chimney meets the roof pulls loose, water gets behind the siding, and by the time it shows up as a ceiling stain the damage has been building for seasons. A typical flashing repair for a Burnsville home runs $400 – $900, with the written estimate setting the final price.

What a Failing Crown Looks Like

A spalling crown often shows as crumbled concrete at the top of the chimney, visible from the yard with binoculars. Once the crown cracks, water pushes into the masonry joints and freeze-thaw does the rest. We rebuild or re-pour crowns so they shed water the way they were meant to.

Why Flashing Fails First

The flashing joint is where roof and chimney move at different rates, so it’s the first place to open up. We use Famco and Gelco flashing solutions because they’re fitted terminations that keep water and animals out. A properly installed cap and flashing stops the intrusion before it reaches the flue.

Trusted Brands We Service in Burnsville

We specify and install professional-grade chimney components from brands commercial contractors rely on: DuraFlex flexible liners, HeatShield flue resurfacing, Gelco and Famco caps and flashing, Olympia Chimney systems, and Copperfield components. We don’t stock parts in a warehouse or claim to have every model on hand, but we source and install correctly the first time, and we can turn most repair work around on a schedule that suits the heating season. Every product is chosen with a functional reason, and we’ll tell you what that reason is. If a brand isn’t the right fit for your Burnsville chimney, we say so.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in Burnsville Homes

  • Cracked clay flue tiles. Original clay-tile liners in 1960s-70s Burnsville chimneys crack and spall after decades of freeze-thaw, letting moisture and gases seep into the masonry structure. A camera run through the flue tells you exactly how bad it is.
  • Shared furnace and water heater stacks. Many Burnsville split-levels vent the furnace and water heater into the same exterior chimney as the fireplace, creating draft and multi-flue venting hazards a surface sweep never catches. We check all flues, not just the one you called about.
  • Spalling crowns and rusted flashing. Exterior crowns and flashing fail first on older split-levels and ramblers, driving water into joints and behind the siding where homeowners can’t see it. From the ground you’ll often spot crumbled concrete or a loose edge.
  • Rusted dampers behind the siding. Early prefab inserts and original dampers corrode after decades of moisture exposure, and the problem hides behind the chase cover. We check the damper and smoke chamber before the firebox is put back in service.

Pricing for Chimney Repair in Burnsville, MN

Chimney repair in Burnsville isn’t a single price, so here’s how it breaks down for this market. A standard sweep runs $150 – $300 depending on the flue and how much creosote has built up. Flashing repair runs $400 – $900. Crown rebuilds run $500 – $1,200, and a full chimney liner installation for a Burnsville home runs $2,800 – $5,500. What pushes a job toward the top of a range is access, how much damage the camera finds, and whether the flue needs a full liner or HeatShield resurfacing can do the job. We never price from the driveway. The estimate is free, the price is set per job by the written estimate, and nothing is recommended without camera evidence you can see yourself.

We Also Serve Cities Near Burnsville

We work throughout the south metro, and homeowners in Apple Valley, Rosemount, Eagan, and Inver Grove Heights call us for the same reason Burnsville does: a technician who diagnoses with a camera, not a sales pitch. If you’re in Burnsville or a neighboring city, our chimney repair team can book a sweep or repair evaluation on a schedule that fits yours, with fast dispatch from 7am to 7pm, Sunday through Friday.

Serving Burnsville, MN – Our Local Coverage Area

We serve Burnsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Burnsville

Why Burnsville Chooses Tundra Chimney Sweep

We set the standard for chimney repair in Burnsville.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Burnsville

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Burnsville Customers Say

Trusted by homeowners across Burnsville and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Scott Parker
★★★★★

"Showed up when they said they would. That's most of the battle."

Allen Chen
★★★★★

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

Doug Miller

Ready for Chimney Repair in Burnsville?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Burnsville.

(866) 942-6061

Request a Free Estimate in Burnsville

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7