Chimney Repair in St. Paul, MN | Tundra Chimney Sweep

Chimney Repair in St. Paul - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for St. Paul Homeowners

St. Paul’s long heating season puts a chimney through more than most homeowners realize: repeated freeze-thaw cycles on the masonry, sustained flue temperatures for months at a time, and water finding its way into cracks that open a little wider every winter. Chimney repair is the work of correcting those failures before they reach the flue liner or the framing around it. Our technicians have up to 11 years of experience, and we specify professional-grade materials from Olympia Chimney, Famco, DuraFlex, HeatShield, Gelco, and Copperfield so a repair holds up under real St. Paul winters, not just a mild season. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician out to document what’s actually happening inside your flue. Call (866) 942-6061 to book an estimate.

Professional chimney technician repairing brick masonry on a residential rooftop in St. Paul, MN

Call (866) 942-6061

Chimney Cap Installation

Chimney Cap Installation fits a properly sized, screened termination over the flue to keep rain, snow, birds, and squirrels out of a system that isn’t designed to handle any of them. A cap is worth installing when a flue is open to the sky, when you’ve found debris or nesting material in the firebox, or when a new appliance is being connected and the old cap no longer matches the flue size. We fit caps from Famco and Gelco, matched to the flue’s dimensions, with the mesh sized correctly for the appliance and the local wildlife. A chimney cap in St. Paul typically runs $150-$450 depending on the flue count and cap style. The written estimate sets the final price.

Why Cap Sizing Matters

An undersized cap chokes draft, and an oversized one lets animals work around the mesh. We measure the flue, not the crown, before specifying a cap. The right fit is a downdraft and intrusion problem solved once.

Stainless Versus Painted Steel

Painted steel caps hold up for a while, but the finish degrades under freeze-thaw and moisture cycling. We favor stainless and copper terminations from Famco and Gelco because the material doesn’t rust through at the seams. That’s the difference between a cap that lasts one heating season and one that lasts many.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement swaps a failed or rusted cap for a new termination before the compromised one lets water, animals, or sparks through. A cap needs replacing when the top has rusted through, when the mesh is torn or missing, when a storm has bent the cap off its footing, or when the cap no longer seals against the flue. We remove the old cap, inspect the flue top and crown for damage the failed cap may have allowed, and install a new cap from Gelco or Famco. Chimney cap replacement in St. Paul usually costs $175-$500 based on cap size, material, and how accessible the chimney is from the roof. The written estimate always sets the final number.

When Storm Damage Forces the Issue

St. Paul storms knock caps loose more often than most homeowners realize. A cap that’s sitting crooked lets water run down the side of the flue instead of off the top. We check the cap’s footing during any roof-adjacent repair.

Choosing the Replacement Material

The right replacement cap does more than stop rain. It sets the draft for the flue and keeps embers contained. We specify from the same professional brands we work with everywhere else, so a replacement is a permanent fix, not a stopgap.

Chimney Liner Installation

Chimney Liner Installation places a continuous stainless or cast-in-place flue liner inside the chimney to carry combustion gases safely to the top, which matters most when the original clay tile liner is cracked, spalling, or absent. You need a liner when you’re converting to a gas insert, when you’ve moved from oil to gas, when the flue is oversized for the appliance it serves, or when an inspection finds gaps in the existing tiles. We install DuraFlex flexible liner systems for appliance conversions and masonry upgrades, and HeatShield flue resurfacing where the existing liner can be restored instead of fully replaced. Chimney liner installation in St. Paul generally runs $1,800-$5,500 depending on flue height, liner diameter, and whether resurfacing is an option. The written estimate sets the final price.

HeatShield Resurfacing Instead of Full Relining

HeatShield lets us restore a deteriorated flue from the inside, without tearing the chimney apart. When the existing liner is intact but spalling or cracked, resurfacing is a valid repair path at significantly lower cost than a full reline. Our technicians are trained in HeatShield application, and we recommend it only when it’s the correct call for the flue.

Sizing the Liner to the Appliance

A liner sized wrong for the appliance is a draft problem waiting to happen. We match the liner’s diameter to the appliance output, not to the old flue’s dimensions. That’s the detail most relining problems come back to.

Chimney Flashing Repair

Chimney Flashing Repair corrects the metal transition between the chimney and roof, which is where most chimney-related water intrusion starts. Flashing needs repair when you spot staining on the ceiling near the chimney, when the metal is pulling away from the masonry, when the caulk and sealant have failed, or when a roofer has already flagged the chimney transition. We re-set or replace flashing with Copperfield and Gelco components and seal the joints correctly for St. Paul weather cycles. Chimney flashing repair in St. Paul typically runs $300-$900 depending on whether the flashing can be reset or must be fully rebuilt with new step and counter flashing. The written estimate sets the final price.

Why Flashing Fails First

Flashing is where metal, masonry, and shingles all meet, and each of those materials moves with the seasons. Water finds the joint the first time the sealant gives. We rebuild that joint with the correct layering so it drains instead of traps.

Step and Counter Flashing Basics

Step flashing goes under the shingles and against the chimney wall, and counter flashing cuts into the masonry to cap it. Done right, the two move independently and shed water. Done wrong, the first heavy rain finds the interior.

Chimney Crown Repair

Chimney Crown Repair restores the concrete cap at the top of the chimney that sheds water away from the flue tiles and masonry below it. A crown needs repair when it’s cracked, when it’s pulling away from the flue, when water is finding its way between the crown and the tiles, or when the original crown was never sloped correctly in the first place. We remove failed crown material, re-form the top with the correct slope, and seal it so water sheds off the sides instead of soaking into the masonry. Chimney crown repair in St. Paul generally costs $400-$1,200 depending on the crown’s size and whether the repair is a patch or a full rebuild. The written estimate sets the final price.

Cracks and Freeze-Thaw Damage

Every winter, water seeps into a crown crack and freezes. The crack widens. The next winter is worse. Repairing the crown stops that cycle before the flue tiles underneath start to spall.

Rebuilding Versus Resurfacing

A thin crown with a surface seal is a temporary fix. Where the crown has lost its structural integrity, a full re-pour with proper slope is the durable answer. We tell you which one you need.

Chimney Repair Companies

Chimney Repair Companies vary widely in what they’re actually set up to do, and the differences show up in what they’ll recommend, what materials they’ll specify, and whether they’re willing to walk away from a job they can’t do correctly. Choosing a chimney repair company in St. Paul comes down to a few concrete questions: can they explain what’s failing and why, do they name the materials they’ll install, and do they provide a written scope before work begins. Our technicians have up to 11 years of experience, we work with DuraFlex, HeatShield, Olympia Chimney, Famco, Gelco, and Copperfield, and we document findings in writing. Chimney repair companies in St. Paul typically price work across the same ranges you see throughout this page, and the written estimate sets the final price.

What to Ask Before You Hire

Ask what material will be installed and why, whether the company handles inspection and repair under one scope, and whether the diagnosis is documented. A company that won’t answer those three questions is a company to think twice about.

Professional chimney technician performing masonry repairs on a brick chimney. in St. Paul, MN

Why Material Sourcing Matters

A repair is only as good as the material that goes into it. Companies that source from the same professional-grade lines commercial contractors use are specifying for durability, not for a fast flip. That’s the standard we hold to.

Chimney Masonry Repair

Chimney Masonry Repair restores the brick and mortar that make up the chimney’s structural shell, which is the layer that keeps water out and holds the flue in place. Masonry repair is called for when mortar joints are receding, when brick faces are spalling or flaking, when the chimney is leaning, or when water is showing up inside the house near the chimney chase. We repoint deteriorated joints, replace spalled brick, and rebuild from the top down where the masonry has failed structurally. Chimney masonry repair in St. Paul usually runs $600-$3,500 depending on the extent of the work, the height of the chimney, and whether scaffolding is needed. The written estimate always sets the final price.

Repointing Versus Rebuilding

Repointing restores the mortar joints while the brick is still sound. Rebuilding is required when brick faces have failed and the structure has lost integrity. The two are very different costs, and the inspection tells us which one your chimney actually needs.

Water Damage and Freeze Cycles

Water is the masonry’s real enemy in St. Paul. Once it finds its way into the brick, freeze-thaw cycles tear the faces off over a few winters. Stopping the water at the crown, flashing, and cap is the first step in any masonry restoration.

Brands We Service

We work with Olympia Chimney because the brand’s liner systems are built for sustained heating-season load, and we know where they wear out. Olympia liner components hold up under the kind of long draw that a Minnesota winter asks of them. We install DuraFlex flexible liner systems because they’re the right answer for the technically demanding relining jobs a lot of sweep-only companies won’t touch, including oil-to-gas conversions and oversized masonry flues. DuraFlex handles the curves and offsets in older St. Paul chimneys without cutting corners.

We fit Famco and Gelco terminations because both brands build caps and flashing components that hold their shape and finish through freeze-thaw cycles. We also work with HeatShield and Copperfield, and we install HeatShield resurfacing where the existing liner can be restored. Whether you have Olympia Chimney, DuraFlex, Famco, Gelco, HeatShield, or Copperfield in place, or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Water staining on the ceiling or chase. Staining usually traces back to failed flashing, a cracked crown, or a missing cap. Left alone, water keeps finding the same path and the damage compounds each heating season.
  • Spalling brick or crumbling mortar. When brick faces flake off or joints recede, the chimney’s shell is losing the ability to keep water out. Repointing early is a small repair; waiting turns it into a rebuild.
  • Strong or smoky odors from the fireplace. Odors that get worse in damp weather or when the chimney isn’t in use usually point to a draft problem, a failed liner, or creosote buildup. None of those are safe to leave in place.
  • Visible cracks inside the firebox or flue. Cracks in the firebox brick or the flue tiles let heat and gases reach materials that were never designed for them. This one is not something to wait on.
  • A cap that’s loose, bent, or missing. A compromised cap is an open door for water, animals, and sparks. Replacement is quick, and the inspection that comes with it tells you what else the cap was hiding.

Our Process, Step by Step

  1. 1
    You call and we book the visit. We ask what you’re seeing and when it started, so we arrive with the right equipment. We answer 24/7, and fast dispatch from 7am to 7pm gets a technician to your home on the schedule we confirm with you.
  2. 2
    We run the camera and document what’s there. A camera inspection of the flue, plus a visual inspection of the crown, cap, flashing, and masonry, shows us exactly what’s failing. Nothing gets estimated from the ground.
  3. 3
    You see what we see. We show you the camera footage and the photos, tell you what’s failing and what isn’t, and explain what happens if you do nothing. No upsell, no scare talk.
  4. 4
    We specify the fix and the material. The written scope names the materials, the approach, and the price. If a repair can safely wait, we tell you that too, and you’ll know why we’re recommending it.
  5. 5
    We do the work and follow with an inspection. Sweep, repair, and inspection all happen under one scope, so you never coordinate a separate inspector after the work is done. Every repair gets documented in writing, which holds up for real estate transactions and insurance requirements.

How Much Does Chimney Repair Cost in St. Paul?

Chimney repair in St. Paul typically runs anywhere from $150 for a simple cap replacement to $5,500 for full liner installation, with most routine repairs landing between $300 and $1,200. A typical cap installation in St. Paul runs $150-$450 depending on flue count and material. A flashing repair runs $300-$900. A crown rebuild runs $400-$1,200. Masonry repointing runs $600-$3,500 based on scope and height. And a full liner installation runs $1,800-$5,500, or less where HeatShield resurfacing can restore the existing liner instead of replacing it.

What affects the price is scope and access. A repair on a chimney that’s easy to reach from the roof is simpler than one that needs scaffolding or a ladder setup the technician can’t safely work from. The material specified matters too: a stainless or copper cap costs more than a painted steel one, and a full DuraFlex reline costs more than a HeatShield resurfacing. You avoid overpaying by getting the diagnosis in writing before you say yes. Our free estimate includes the camera inspection, the photos, and a written scope with a fixed price, so you know what you’re paying for before any work starts. Nothing is recommended without camera evidence you can see for yourself, and if a repair can safely wait, we tell you that too. Call (866) 942-6061 for an exact quote.

Our Service Area Near St. Paul

We work in St. Paul and the surrounding communities, including South St. Paul, North St. Paul, Maplewood, Oakdale, Vadnais Heights, Inver Grove Heights, White Bear Lake, Woodbury, Shoreview, Eagan, and Lake Elmo. Each of those cities has its own mix of chimney age, material, and failure patterns, and we specify the repair for what’s on the roof. You can read more about chimney repair in South St. Paul, chimney repair in Maplewood, or the Tundra Chimney Sweep home page. Booking times for each city depend on the schedule, and we confirm a time with you when you call.

Serving St. Paul, MN – Our Local Coverage Area

We serve St. Paul and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in St. Paul

Schedule Your Chimney Repair Service in St. Paul Today

If your chimney is showing any of the signs we covered, book a visit before the next heating season. We’ll run the camera, show you what’s there, and give you a written scope with a fixed price. Call (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation.

Written by the team at Tundra Chimney Sweep.

Why St. Paul Chooses Tundra Chimney Sweep

We set the standard for chimney repair in St. Paul.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in St. Paul

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What St. Paul Customers Say

Trusted by homeowners across St. Paul and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Scott Parker
★★★★★

"Showed up when they said they would. That's most of the battle."

Allen Chen
★★★★★

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

Doug Miller

Ready for Chimney Repair in St. Paul?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in St. Paul.

(866) 942-6061

Request a Free Estimate in St. Paul

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7