Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Inver Grove Heights
If you’re searching for a chimney sweep in Inver Grove Heights, the short answer is this: most homes here need a Level 1 or Level 2 inspection and a proper cleaning of a factory-built fireplace flue, not the deep masonry soot sweep common in older St. Paul. We know this suburb block by block – the split-levels off Cahill Avenue, the townhomes closer to Robert Street, the bluff lots out in 55077 – and we build estimates around what your system actually is. Our technicians have up to 11 years of experience, and we bring camera inspection and a written photo report to every job. Call (866) 942-6061 to book a sweep. We answer 24/7.
Why Inver Grove Heights Homeowners Call Tundra Chimney Sweep for Chimney Sweep
Chimney work in Inver Grove Heights has a reputation problem, and we understand why. This is a suburb where a quick sweep call often turns into a pitch for thousands of dollars of liner work, and the homeowner has no way to verify whether any of it was necessary. That’s exactly the situation we set out to fix. When we inspect a flue, you see the same camera footage we do, on the same screen, before anyone recommends a repair. If a sweep is all your system needs, that’s what you get – and if something can safely wait until next season, we’ll tell you plainly.
Our technicians have up to 11 years of experience, and we specify materials from professional-grade brands like DuraFlex and HeatShield because they hold up under sustained heating-season use, not just mild conditions. For Inver Grove Heights, that matters more than most places: the fireplace here runs near-constant from November through March, and cheap materials don’t tolerate that load. We’re licensed and insured, we document every inspection in writing, and the price is set by a flat-rate estimate you agree to before any work begins. We’re not the biggest name in the Twin Cities, and we don’t need to be. We’d rather do the sweep correctly and have you call us back next year.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Fireplace Cleaning in Inver Grove Heights
Fireplace Cleaning in Inver Grove Heights usually starts with the cap, not the firebox. Many homes here were built between the 1970s and 2000s as split-levels or townhomes, and the fireplace is a factory-built unit with a metal flue rather than a masonry stack. Cleaning that system means clearing the flue, brushing the firebox and smoke chamber, and confirming the damper opens and seats properly – a different job than sweeping soot out of brick. It’s the right call when you’re seeing smoke roll into the room on the first fire of the season, when the glass on a gas unit blackens faster than usual, or when you simply can’t remember the last time the chimney was opened up. A typical fireplace cleaning in Inver Grove Heights runs $150 – $275, with the final price set by the written estimate after we see the unit.
What a Cleaning Covers on a Factory-Built Unit
A factory-built fireplace has a listed liner the manufacturer approved for a specific appliance, which is why we check the flue data plate before we touch anything. The sweep clears creosote from the liner and smoke chamber, checks the firebox panels for cracks, and confirms the cap and spark arrestor are clear. Anything beyond cleaning gets recorded on camera and shown to you before it becomes a recommendation.
Gas Fireplaces and Insert Cleaning
A gas fireplace still vents, and that flue still collects debris and moisture even though there’s no wood smoke. On these units we clean the firebox, check the venting termination, and look closely for corrosion or a liner that was never rated for the gas appliance now using it. That’s a common finding in homes here where a previous owner swapped the fireplace insert without updating the flue.
Chimney Services in Inver Grove Heights
Chimney Services in Inver Grove Heights covers more than the sweep itself, because a flue is a system and the parts wear together. A standard annual sweep starts at $165 – $225. Creosote removal runs $225 – $450 when the buildup is heavy and glazed, since glazed creosote doesn’t brush out and takes longer to clear safely. A Level 2 inspection, which runs a camera the full length of the flue and documents condition in writing, typically runs $200 – $375 and is worth it whenever you’re buying a home here or can’t remember your last inspection. If we find a cracked crown or a deteriorated liner, we’ll show you the footage and quote a repair separately – never as part of the sweep price.
Inspection Before Anything Else
Every job we do starts with an inspection, and on an Inver Grove Heights home that often means a Level 2 with a camera, because factory-built flues hide problems you can’t see from the firebox. We document what we find – creosote staging, spalling, cracked panels, a liner the wrong size for the appliance – in a written report with photos. That report is usable for a real estate transaction or an insurance requirement, and it’s yours whether or not you buy anything from us.

Repair and Relining When It’s Warranted
When the evidence supports it, we install and can also resurface flue liners. HeatShield lets us resurface a deteriorated liner without full demolition, which saves real money over a complete reline in the right situation, and DuraFlex handles the more demanding relining jobs, including oversized masonry flues and appliance conversions. We name those brands because they’re what commercial contractors install – and we’ll tell you honestly when a repair can wait a season.

Trusted Brands We Service in Inver Grove Heights
We work with a curated roster of professional-grade chimney brands, and we name them because each one has a specific job. DuraFlex flexible liner systems are what we reach for when a flue needs relining or an appliance conversion demands it. HeatShield handles resurfacing a deteriorated liner without full removal. Gelco and Copperfield supply the caps and flashing that keep water and animals out of a flue – the parts that matter most on a blustery Inver Grove Heights winter. We don’t claim to stock parts locally; we specify and install the right component for your system, and we’ll tell you what turnaround to expect before you commit. Call (866) 942-6061. We answer 24/7.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Inver Grove Heights Homes
Here’s the local failure pattern. The industry’s worst upselling happens around exactly these problems, so we want you to know what to look for and demand camera evidence before agreeing to any of it:
- A wood fireplace converted to gas without a new liner. A previous owner swaps the appliance but leaves the existing metal flue, which may be undersized or unlisted for the new unit. Draft suffers and the appliance can vent poorly. That’s a camera-evidence call, not a guess.
- Freeze-thaw cracks in the crown and mortar. Long, cold winters with deep frost followed by a thaw crack the chimney crown and mortar joints, letting moisture into the flue and causing spalling. A sweep alone won’t fix it; we show you the cracked crown on camera before recommending any repair.
- Cottonwood and oak fluff clogging caps on 55077 bluff homes. Homes near the wooded bluff land downstream of cottonwood and oak see caps and spark arrestors pack with seed fluff and leaf litter by late summer. Draft dies and smoke backs up on the first fall fire, so the cap gets cleared before the chimney sees real use.
- Glazed third-degree creosote from near-constant winter burning. When the fireplace runs most days from November to March, creosote builds fast and can glaze into a hard deposit that won’t brush out. We stage it, show you the footage, and quote removal based on what’s actually there.
Pricing for Chimney Sweep in Inver Grove Heights, MN
Chimney work is priced per job, and the written estimate sets the final number – the ranges below are what’s typical in the Inver Grove Heights market so you have something concrete to compare against.
- Annual sweep and Level 1 inspection: $165 – $225
- Level 2 inspection with camera and written report: $200 – $375
- Fireplace cleaning on a factory-built or gas unit: $150 – $275
- Heavy or glazed creosote removal: $225 – $450
- Liner resurfacing or relining: quoted separately, only after camera evidence
What moves the number: how heavy the creosote is, whether the flue is factory-built metal or masonry, how accessible the roof is, and whether a Level 2 inspection is needed on top of the sweep. The estimate is free, and nothing gets recommended that you can’t see on camera. Call (866) 942-6061 for an exact quote.
We Also Serve Cities Near Inver Grove Heights
We serve homeowners throughout the south metro, and much of our schedule runs along roads that lead straight out of Inver Grove Heights. That includes Eagan, South St. Paul, Cottage Grove, and Rosemount – all close enough that booking a sweep is easy to fit around a normal week. Whether you’re in a split-level near the bluffs or a townhome closer to the highway, our chimney sweep team gives you the same camera evidence and the same flat-rate estimate. Call (866) 942-6061 for a free quote.
Serving Inver Grove Heights and the surrounding Dakota County communities is a core part of what we do, so we know the local housing stock and the seasonal patterns that come with it.
Serving Inver Grove Heights, MN – Our Local Coverage Area
We serve Inver Grove Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Inver Grove Heights
Yes. A factory-built fireplace still needs an annual inspection even though it isn’t masonry. Those units have listed metal liners and firebox panels that crack, and a previous owner may have converted the fireplace to gas without updating the flue – all of which need checking each year. We run a camera and document what we see. Call (866) 942-6061 to book; estimates are free.
It isn’t just cosmetic. That white crust is efflorescence, and it usually means moisture is getting into the masonry through a cracked crown or failed mortar joint and pushing salts out through the brick. Left alone, it leads to spalling brick and a flue that stays damp. We find the source on camera before recommending repair. Call (866) 942-6061 for an exact quote.
That flue needs a check for whether it’s the right size and type for the gas appliance now using it. Conversions without a new liner are one of the most common problems we see in Inver Grove Heights. A sweep should confirm the flue is listed for the appliance, clear the venting termination, and check for corrosion. We show the footage before any repair. Call (866) 942-6061; estimates are free.
You usually can’t tell by looking from the firebox – third-degree, or glazed, creosote is a hard, shiny deposit that doesn’t brush away, and it’s a real chimney-fire fuel. The only reliable way to catch it early is a camera inspection that stages the buildup honestly. We show you the screen and recommend removal only when the footage supports it. Call (866) 942-6061 for a free estimate.
Cottonwood and oak seed fluff, especially on 55077 bluff homes downwind of the wooded land, drifts into caps and spark arrestors and packs them by late summer. It clogs the screen and kills draft, so the first fall fire smokes into the room. Clearing the cap before heating season is the fix, and a properly fitted cap from a brand like Gelco helps. Call (866) 942-6061 to book a sweep; estimates are free.
If you’re in Inver Grove Heights and want a straightforward answer about your chimney, call (866) 942-6061 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We deliver camera inspection and a written photo report with every job, use professional-grade DuraFlex and HeatShield materials where they’re warranted, and never recommend work you can’t see for yourself. Every job is backed by our satisfaction guarantee, so you know the result holds up before you pay.
Written by the team at Tundra Chimney Sweep.