Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Blaine
If you own a home in Blaine and you’re booking your first real chimney service, here’s the short version: a proper sweep in this city is a certified sweep-and-inspect on a factory-built fireplace and its metal flue, priced flat before we book, and backed by a camera look you get to see. Our technicians have up to 11 years of experience. We know the 55449 subdivisions, the two-story and rambler tract homes out toward the northern fringe, and what those flues actually look like inside. Call (866) 942-6061. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our crew is closed on Saturday.
Why Blaine Homeowners Call Tundra Chimney Sweep for Chimney Sweep
Most of the chimneys we see in Blaine aren’t masonry. They’re stainless and metal flue liners inside prefab fireplaces from the 1990s and 2000s, and they call for a different set of skills than the brick-and-mortar rebuilds common closer to the cities. We focus on that work. Our team works with professional-grade product lines – DuraFlex flexible liners, HeatShield flue resurfacing, Olympia Chimney components, Famco and Gelco caps and flashing – because a metal flue is a system, and it should be specified for cold-weather performance, not patched with whatever’s on the shelf.
What you’ll notice when you call is that we quote a flat price before we book, and we don’t move the number once we’re on the roof. That matters in Blaine, where homes sit on generous lots spread across the northern metro and a technician’s drive time between jobs can rival time on the roof. A price that’s settled before the visit keeps that honest. If you’d like a broader look at how our chimney sweep service works, it’s all laid out on that page.
You get a camera inspection and a written photo report with the sweep, whether you’re here in Blaine or anywhere nearby. Nothing gets recommended that you can’t see for yourself.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Fireplace Cleaning in Blaine
Fireplace Cleaning in Blaine usually means the firebox, the glass or doors, the grate, the ash pit and the smoke chamber – not just the flue. It’s the part of the job that most homeowners notice. When a Blaine fireplace has sat through spring melt and a humid summer, you’ll often find the firebox coated in soot and creosote flake, with a stale, smoky smell the first time you light it in fall. Cleaning that out before the heating season is what keeps the whole room from smelling like last year’s fires. A typical fireplace cleaning in Blaine runs $150 – $280, depending on how much soot has built up and whether the doors and glass need attention.
What a Full Firebox Cleaning Covers
We vacuum the firebox and ash pit with a HEPA setup so nothing migrates into the room, then wipe down the doors, glass and surround. The damper and smoke shelf get brushed and checked while we’re in there. It’s a contained job – we lay drop cloths and keep the mess in our bags, not your living room.
When to Book a Fireplace Cleaning
Book it before you start burning for the season, and again midseason if you burn hard. A gas insert mostly needs the logs, glass and pilot area cleaned rather than a full soot sweep. If the firebox is smoking back into the room, that’s a damper or draft problem and needs an inspection, not just a cleaning.
Chimney Services in Blaine
Chimney Services in Blaine cover the whole system: sweep, repair and inspection under one roof, so you don’t have to coordinate a separate inspector after the sweeping is done. That matters for the prefab fireplaces common here – the flue, cap, crown, flashing and damper all interlock, and a problem in one usually shows up in another. A standard annual sweep in Blaine runs $180 – $320. A Level 1 inspection is typically folded into the sweep, while a Level 2 inspection (the kind you need for a real estate transaction or after a chimney fire) runs $250 – $450.
Sweep, Repair and Inspect Together
Because we handle all three, the person who brushes your flue is the same one who documents its condition. That written report is usable for a home sale or an insurance requirement, and it lists what we found and why it matters – not a sales pitch.

Repair Options for Metal Flues
For deteriorated liners, HeatShield resurfacing can restore a flue without full demolition, which saves cost over a full reline. When a full reline is the right answer, DuraFlex flexible liners handle the job, including oil-to-gas conversions and oversized masonry flues that sweep-only companies tend to decline.

Trusted Brands We Service in Blaine
We specify and install components from professional-trade product lines: DuraFlex liners, HeatShield resurfacing, Olympia Chimney parts, and Famco and Gelco caps and flashing. We don’t keep parts on hand or stock products locally – we spec the right one for your flue and source it, so you get a proper fit rather than a compromise. That approach gives Blaine homeowners fast turnaround and access to material solutions most sweep-only outfits can’t source or install correctly. Every piece we put on a chimney is chosen to hold up under a full Minnesota heating season, not just mild-weather use.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Blaine Homes
- Glazed creosote in prefab fireplaces. Homes built in the 1990s and 2000s often have a firebox used a few times each winter, usually with smoldering green firewood, which glazes the flue. That’s third-degree creosote, and a standard brush won’t clear it – it needs chemical treatment first.
- Undersized or skipped sweeps. When a chimney gets swept once and then forgotten, the buildup outpaces what a single brush pass can remove. That’s why we check the flue with a camera rather than assume it’s clean.
- Freeze-thaw damage to caps and crowns. Long, cold winters with heavy freeze-thaw cycling and snow loads stress exterior caps and crowns. A cracked crown lets meltwater in, and that moisture feeds the creosote problem inside.
- Missing or poorly fitted caps. A cap that isn’t properly fitted lets water and animals into the flue. On homes where the exterior flue has already taken a beating from Minnesota winters, that’s the last thing it needs.
Pricing for Chimney Sweep in Blaine, MN
Here are the typical ranges we work from in Blaine. A standard annual sweep runs $180 – $320. Fireplace cleaning runs $150 – $280. A Level 2 inspection runs $250 – $450. Creosote removal on a heavily glazed flue sits toward the top of the sweep range, and heavy third-degree creosote may add a chemical treatment before the next season. What moves the number: how many flues, whether the fireplace is prefab with a metal liner or masonry, and how much buildup we find once the camera goes in. The flat price is agreed before we book, and the written estimate sets the final price. The estimate itself is free. Call (866) 942-6061 for an exact quote.
We Also Serve Cities Near Blaine
The same sweep-and-inspect service we run in Blaine covers the towns around it too – Lino Lakes, Mounds View, Shoreview and Vadnais Heights. If you’re just outside the city line, we can book you the same way. Learn more about how we serve Blaine and the northern metro fringe, or ask when you call.
Serving Blaine, MN – Our Local Coverage Area
We serve Blaine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Blaine
A prefab fireplace used a few times a winter usually needs sweeping about once a year if it sees light use, and more often if you burn steadily through the season. Many 55449 homes were built in the 1990s and 2000s with factory-built fireplaces that only got light use, so a yearly sweep keeps the glazed creosote from building up. Call (866) 942-6061 for an exact quote – estimates are free.
First-degree creosote is a light soot a brush clears easily, second-degree is a flaky, tar-like layer, and third-degree is glazed and hardened. In Blaine’s prefab fireplaces, smoldering green firewood tends to produce that glazed third-degree buildup, which a standard brush won’t remove and needs chemical treatment. Call (866) 942-6061 to book an inspection and find out which stage you’re at.
Yes. Every sweep comes with a camera inspection and a written photo report you can see for yourself. You get to look at what we found before any repair is recommended, and we’ll tell you plainly when work can safely wait. Call (866) 942-6061 for an exact quote.
A sweep also checks the damper, smoke chamber, chimney cap, crown and flashing – not just the flue. That matters here because freeze-thaw cycling and snow loads on the exterior flue stress caps and crowns, and a crack lets moisture in. Call (866) 942-6061 to schedule.
Sometimes it can wait, and we’ll say so. Light soot and a sound cap and crown can often hold until next season. Glazed third-degree creosote or a cracked crown should be addressed before the heating season, not after – chimney fires and carbon monoxide risk are real when a flue is compromised, but we won’t scare-sell you into work that isn’t needed. Call (866) 942-6061 for a free estimate and a straight answer.
Ready to book a sweep? Call (866) 942-6061 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A flat price is agreed before we book, a camera inspection and photo report come with the job, and we’ll tell you honestly when work can wait until later.
Written by the team at Tundra Chimney Sweep.