Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for St. Paul Homeowners
Most chimney problems in St. Paul announce themselves quietly: a stain on the ceiling after ice dam weather, a draft that wasn’t there last winter, a flue that sounds different when the furnace kicks on. A chimney inspection is how you find out which of those things is a real defect and which is just old-house character. Our technicians have up to 11 years of experience reading exactly those signals, and we put everything we find in a written report with photos you can keep, hand to a buyer, or send to your insurer. No guesswork, no pressure to book repairs on the spot. We answer 24/7 at (866) 942-6061, and we can often schedule same-day inspections in St. Paul. Call and we’ll get you on the book.

Fireplace Inspection
Fireplace Inspection covers the firebox, damper, smoke chamber, and the first stretch of flue above the fire, and it’s the right call when you burn wood regularly or just bought a house with a fireplace you’ve never lit. We look for cracked firebrick, gaps in the mortar joints, a damper that no longer seals, and creosote glaze that sweeping alone won’t remove. Tundra Chimney Sweep performs the inspection and any needed sweep under one scope, so you don’t have to coordinate a separate appointment after repairs. Pricing depends on what we find; typical fireplace inspections start at $99-$249, and the written estimate sets the final price after we’ve seen your setup. If we find a defect, you’ll get the photo, the explanation, and a repair range before anything is authorized.
What the Firebox Tells Us
Cracked firebrick and washed-out mortar joints show up long before a fireplace is unsafe to use, and catching them early is the whole point of the inspection. Heat cycles in a St. Paul fireplace that runs hard from October through March open gaps that a casual glance never sees. We document each one and tell you plainly which ones can wait a season and which ones shouldn’t.
Damper and Smoke Chamber Check
The damper and smoke chamber are the two parts of a fireplace most likely to vent smoke into the room instead of up the flue. We work the damper by hand and inspect the smoke chamber for rough mortar that traps creosote and slows the draft. If smoke rolled into your living room during your last fire, this is usually why.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services from Tundra Chimney Sweep cover the whole system, from the cap down to the appliance connection, and they’re worth scheduling before you burn, after a storm, or whenever a home sale or insurance requirement calls for documentation. We inspect for cracked crowns, failing flashing, spalled brick, liner damage, and blocked terminations, and we photograph each finding on Tundra Chimney Sweep job sheets you keep. Because we also handle sweeping and repair, anything we find can be corrected in the same visit or booked without a second trip. Typical inspections run $99-$249 depending on level and access; the written estimate sets the final price. We work with Olympia Chimney and Famco components when a fix is needed, so replacements match what’s already on your roof.
What the Written Report Includes
Every inspection ends with a written report you can file, forward, or hand to a realtor. It lists each defect we found, the photo that shows it, and the repair path we’d recommend. You should never have to take our word for what’s happening in your flue.
When to Schedule an Inspection
Schedule one before your first fire of the season, after any chimney fire or severe ice storm, and any time you notice a new smell or draft. If you’ve just bought an older St. Paul house, a full inspection before the first winter is the right baseline. Once you know what’s there, maintenance gets simple.
Chimney Flue Inspection
Chimney Flue Inspection focuses on the vertical channel that carries smoke and gas out of your house, and it’s the part of the system where hidden damage causes the most serious problems. We inspect the liner for cracks, gaps at joints, missing sections, and proper clearance to combustibles, and we check that the flue size matches the appliance. A flue that’s too large for a modern furnace or insert cools too fast and drafts poorly; one that’s too small can back up smoke. Tundra Chimney Sweep inspects and, when needed, resurfaced with HeatShield, which lets us repair a deteriorated clay liner without full demolition. Costs for a flue inspection run $99-$249, and if resurfacing is needed the estimate comes before any work begins. The written estimate sets the final price.
Liner Condition and Clearance
A clay liner can look fine at the top and be cracked a few feet down, which is why we run the full length rather than eyeballing the visible section. Clearance to combustibles matters just as much: framing that sits too close to the flue is a slow-burning risk. We document both, and we tell you which findings are urgent and which are routine.
Gas and Oil Appliance Flues
Gas and oil appliances vent differently than a wood fireplace, and their flues fail in different ways. Oil flues commonly show corrosive damage from flue gases, while gas appliances can leave a flue too large to draft properly. DuraFlex systems are one option we specify when a flue needs a new liner sized correctly for the appliance.
Chimney Fire
Chimney Fire damage is rarely obvious from the ground, and the inspection after one is what determines whether the system can go back into service. A chimney fire can sound like a low roar or a series of pops, but many are slow and quiet, burning creosote off the flue walls and cracking the liner or warping the damper in the process. If you suspect you’ve had one, stop using the fireplace and book an inspection before lighting another fire. Tundra Chimney Sweep inspects the flue for heat damage, checks for cracked or spalled liner, and documents what we find. Post-fire inspections start at $99-$249, and if the flue needs relining the cost is quoted separately and written down before work begins. Call (866) 942-6061 the same day if you suspect a fire.
Signs of a Chimney Fire
Look for puffy, honeycombed creosote in the firebox, warped metal dampers, cracked flue tiles, or a strong burnt smell that lingers for weeks. A neighbor seeing sparks or flames from the top of the chimney is another signal. Any of these means an inspection, not another fire.
Damage a Fire Leaves Behind
The heat of a chimney fire often warps the damper, cracks flue tiles along their length, and can damage the smoke chamber. Some of that damage won’t be visible without a camera. The right move is to inspect before you use the fireplace again, not after.
Level 2 Chimney Inspection
A Level 2 Chimney Inspection is the full-scope inspection that includes the accessible portions of the chimney exterior and interior, plus a video scan of the flue, and it’s the level required for most home sales, insurance reviews, and post-chimney-fire evaluations. It covers the cap, crown, flashing, brickwork, firebox, damper, smoke chamber, and the full length of the flue via camera. Tundra Chimney Sweep performs Level 2 inspections as a matter of course when the situation calls for it, and we deliver a written report with photos that holds up to a buyer’s questions. Expect $150-$349 depending on roof access and how many flues the chimney has; the written estimate sets the final price. Because we sweep, inspect, and repair under one roof, you’re not handing the report to a different contractor afterward.
When Level 2 Is Required
Most home sales involving a solid-fuel appliance call for a Level 2, and so do post-fire checks and appliance changes, such as switching from wood to gas. Any change to what vents into the flue is a reason to look at the whole flue, not just the firebox. If you’re not sure which level you need, call and we’ll tell you.
What the Video Scan Adds
The camera shows what a flashlight can’t: cracked tiles, gaps at joints, and offsets in the flue that a visual check misses. That footage goes into your report so a buyer, realtor, or insurer can see the same thing we did. It’s the difference between “looks fine” and “here’s the evidence.”
Chimney Leak
Chimney Leak problems in St. Paul usually start at the top, where the crown, flashing, and cap meet ice, snow, and freeze-thaw cycling all winter. Water tracking down the chimney shows up as ceiling stains, damp firebox walls, rusted dampers, or spalled brick on the exterior. We inspect the cap and flashing first, because Famco and Gelco termination and flashing solutions solve most leaks without masonry work. If water has already reached the flue, a camera scan tells us whether the liner is damaged or just wet. Leak-related inspections and repairs run $150-$400 for the diagnostic plus minor repairs; the estimate is written and approved before work starts. Fixing a leak early is cheaper than fixing the framing it soaked.
Where Water Gets In
Cracked crowns, failed flashing at the roof line, missing caps, and open mortar joints are the four usual entry points. Each one needs a different fix, and guessing at the wrong one just moves the leak. We check all four before recommending a repair.

Ice, Snow, and Freeze-Thaw Damage
A St. Paul winter puts a chimney through dozens of freeze-thaw cycles, and water trapped in brick or mortar expands every time it freezes. That’s how a hairline crack becomes spalled brick by spring. Addressing the leak before winter sets in prevents most of the damage.
Chimney Camera Inspection
A Chimney Camera Inspection is a video scan of the full length of your flue using a camera that shows the inside of the liner on a monitor in real time, and it’s the only way to see cracks, gaps, and offsets that a visual check from the top can’t reach. We bring the camera to any inspection where the flue condition is uncertain, and we show you the footage as we go so you can see what we see. The footage is saved and included in your written report. Camera scans are typically included in a Level 2 or added to a standard inspection for $99-$249 depending on scope; the written estimate sets the final price. If the video shows a liner that can wait, we’ll say so.
What the Camera Finds
Cracked flue tiles, missing mortar joints, separation between liner sections, and debris that’s dropped and lodged out of sight. None of these show up from a flashlight check. The camera shows the flue as a system, not just the top few feet.
Seeing the Evidence Yourself
You shouldn’t have to authorize a reline on a technician’s word alone. We walk you through the footage and point out each finding as it appears. If a repair can safely wait a season, we’ll tell you that too, in writing.
Brands We Service
We work with DuraFlex flexible liner systems when a flue needs a correctly sized liner for an oil-to-gas conversion or an oversized masonry chimney, and the flexible construction lets us fit a round liner to a flue that isn’t perfectly straight. We also specify Olympia Chimney components and liners in cases where the flue geometry or appliance type calls for them, and we know where those systems wear first when they fail.
For caps and flashing, we work with Famco and Gelco because a properly fitted termination is the difference between a chimney that sheds water and one that feeds it into the masonry. HeatShield is our resurfacing path for a deteriorated clay liner that doesn’t need full replacement. Whether you have DuraFlex, HeatShield, Olympia Chimney, Famco, Copperfield, Gelco, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. Backdraft usually means a blocked flue, a damaged smoke chamber, or a flue sized wrong for the appliance. None of those fix themselves, and each fire you light makes the situation worse. Get it inspected before the next burn.
- Water stains or rust around the firebox. A stain on the ceiling near the chimney or rust on the damper means water is finding a path into the system. That water damages the liner and the framing behind it. A leak diagnostic now is cheaper than the framing repair later.
- Cracked or crumbling brick and mortar outside. Spalled brick on the exterior of a St. Paul chimney usually traces to freeze-thaw damage from a leak that started at the crown. The crack you see at eye level is often older than it looks. An inspection tells you how far it goes.
- A strong burnt or creosote smell. Creosote odor that lingers after a fire can mean glaze-level buildup or damage from a prior chimney fire. Either way, the flue needs to be looked at with a camera before it’s used again. A smell is a symptom, not a nuisance.
- You’ve just bought the house. An inspection before the first heating season is the baseline that makes every later decision easier. You’ll know what you have, what it needs, and what can wait. Without it, you’re guessing.
Our Process, Step by Step
- 1
We talk through the symptoms first. Before we open anything, we ask what you’ve noticed: smoke behavior, drafts, smells, water stains, and how the appliance has been running. That conversation shapes where we look hardest and saves you time.
- 2
We inspect from the ground up and the top down. Exterior cap, crown, flashing, and brick come first, then the firebox, damper, and smoke chamber. The chimney is a system, and a defect at the top often explains a symptom at the bottom.
- 3
We run the camera down the flue. A video scan shows the liner’s true condition, including cracks and gaps a visual check can’t reach. We show you the footage live so the findings are yours to see, not just ours to explain.
- 4
We sweep when sweeping is what’s needed. If creosote buildup or debris is part of what we found, we handle it during the same visit. We clean with drop cloths and containment so your living room stays as it was.
- 5
We write it down and walk you through it. You get a written report with photos and video, a clear list of what’s urgent, what’s routine, and what can safely wait. The estimate comes in writing before any repair work begins.
How Much Does Chimney Inspection Cost in St. Paul?
A standard chimney inspection in St. Paul typically runs $99-$249 depending on the level of inspection and how accessible the roof and flue are. A Level 2 inspection with a video scan generally runs $150-$349, which reflects the extra time on the roof and the full-length camera work. Fireplace inspections and flue inspections fall in the $99-$249 range. If the inspection uncovers a problem, repair costs depend entirely on what it is: resurfacing a flue with HeatShield is one path, a DuraFlex liner or Famco cap replacement is another. We quote every repair separately in writing.
What affects the price most is scope: a single-flue chimney with easy roof access is straightforward, while a chimney with multiple flues or a steep, icy roof takes more time and care. A post-fire inspection that includes a camera scan and full flue assessment costs more than a routine visual check. What you shouldn’t pay extra for is the diagnostic itself: the inspection confirms what’s actually wrong, and it’s what stops you from buying a liner you don’t need.
The way to avoid overpaying is to make sure any recommendation for major work comes with camera or photo evidence you can see. If you’re told you need a full reline and nobody shows you the inside of the flue, ask to see it. We show the footage as a matter of course. Our estimate is free and written, no work is authorized without your approval, and if a defect can safely wait a season, the report says so.
Our Service Area Near St. Paul
We inspect chimneys across St. Paul and the surrounding communities, including South St. Paul, Maplewood, North St. Paul, Oakdale, Vadnais Heights, Inver Grove Heights, White Bear Lake, Woodbury, Shoreview, Eagan, and Lake Elmo. We book inspections across the metro and dispatch Sunday through Friday, 7am to 7pm. When you call, we’ll find the nearest opening on the schedule and confirm the details before anyone heads out.
Serving St. Paul, MN – Our Local Coverage Area
We serve St. Paul and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in St. Paul
A chimney inspection is a documented assessment of the whole chimney system: cap, crown, flashing, brickwork, firebox, damper, smoke chamber, and flue. It tells you what condition the system is in and what, if anything, needs attention. We do it with a camera and a written report, not a sales pitch. Call (866) 942-6061 for an exact quote; estimates are free.
Most inspections take 45 minutes to an hour and a half, depending on roof access and how many flues the chimney has. A Level 2 with a full camera scan and a written report can run a little longer. We’ll tell you roughly how long to expect when you book. Call (866) 942-6061 to schedule.
Expect $99-$249 for a standard inspection and $150-$349 for a Level 2 with a camera scan. Those are typical ranges; the written estimate sets the final price once we’ve seen your setup. There’s no charge for the estimate itself. Call (866) 942-6061 for an exact quote; estimates are free.
Yes. We inspect and service Olympia Chimney and DuraFlex liner systems, along with HeatShield, Famco, Gelco, and Copperfield products. We know where these systems wear and what a proper installation looks like. Whether you have one of those brands or another make, we can help. Call (866) 942-6061 for an exact quote; estimates are free.
Same-day inspections are often possible when you call early. We answer 24/7 at (866) 942-6061, and we dispatch Sunday through Friday, 7am to 7pm; a call outside dispatch hours is booked into the next opening. We’re closed Saturday. Call (866) 942-6061 and we’ll find you the nearest slot.
Yes. Work we perform is warranted, and the written inspection report documents the condition of the system at the time we saw it. If a repair we recommended needs follow-up, the report is the starting point. Call (866) 942-6061 to talk through what your system needs.
Clear the area in front of the fireplace, make sure we can reach the roof or the cleanout, and let us know if the appliance is gas or oil so we bring the right equipment. Note any symptoms you’ve seen: smoke, drafts, smells, or water stains. Those details help us focus the inspection. Call (866) 942-6061 to book.
Schedule Your Chimney Inspection Service in St. Paul Today
If you’re not sure when your chimney was last inspected, that’s reason enough to book one. We’ll tell you what we find, show you the evidence, and put it in writing, and we’ll say plainly when work can safely wait. Call (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimate, and a schedule that works around your heating season.
Written by the team at Tundra Chimney Sweep.