Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burnsville, MN
If you’re booking chimney work in Burnsville, start with an inspection. Most of the calls we take here aren’t really about soot – they’re about what four decades of Minnesota freeze-thaw has done to a 1960s or 1970s chimney, and whether the flue is still safe to use. Our technicians have up to 11 years of experience reading exactly that kind of wear. Call (866) 942-6061 to set up a visit. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Burnsville Homes Are Different
Burnsville grew up fast in the 1960s through the 1980s, and the housing stock still shows it. Split-levels, ramblers and two-story colonials dominate, most with one masonry fireplace or a factory-built insert, and many of those fireplaces were built for ambiance rather than heat. That matters because an ambiance fireplace still has a flue, a damper and a crown, and all three age.
The bigger local factor is weather. Long cold winters with repeated freeze-thaw cycles push moisture into masonry joints and crowns, which is where spalling starts and where cracked flue tiles usually begin. Summer humidity and spring rain then work on the creosote left from the heating season. In practice, a cleaning visit in Burnsville often doubles as a moisture-damage inspection, whether the house sits near the river valley or up on the higher ground toward the south. Older 1960s and 1970s models frequently have exterior chimneys that have taken decades of that weather, and crown and flashing failures are common on them.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Burnsville Services
Two jobs come up again and again with Burnsville homeowners, and both start from the same principle: your flue is a system, so we diagnose before we touch anything.
Chimney Sweep in Burnsville
A sweep in Burnsville is rarely just a brush down the flue. Many split-levels here vent the furnace and water heater into the same exterior chimney as the fireplace, so what looks like a simple cleaning turns into a multi-flue safety check. We inspect each flue separately, remove creosote and debris, and note anything the brush reveals about the liner or damper. If you want the full breakdown of how that visit runs, see Chimney Sweep in Burnsville.

Chimney Repair in Burnsville
Repair in this city is usually about water and temperature, not fire. Spalling crowns, cracked flue tiles and rusted dampers are the recurring findings, and on 1960s and 1970s exterior chimneys the flashing is often the first thing to fail. We specify repairs for cold-weather performance, because a patch that holds through a mild fall won’t hold through a Minnesota February. The full scope of what we fix is covered on Chimney Repair in Burnsville.

Chimney Inspection in Burnsville

Chimney inspection in Burnsville is mostly a structural assessment dressed up as a sweep. The 1960s through 1980s suburban homes here are packed with original masonry fireplaces and early prefab inserts, and after 40-plus years of freeze-thaw cycles many have spalling crowns, cracked flue tiles and rusted dampers hidden behind the siding. A camera inspection and written report are how you find out which of those you actually have, rather than guessing from the firebox. If you want the full picture of what a chimney inspection covers, that page walks through it. Our technicians have up to 11 years of experience documenting exactly these conditions.
Chimney Flue Inspection
Signs you need it
You need a flue inspection if you’ve had a chimney fire, a prolonged smoke smell, or visible cracking in the firebox tile, or if the home has an original clay tile liner that has never been scoped.
What it costs in Burnsville
A standard flue inspection typically runs $125 to $275, and a camera-scoped inspection with a written report usually falls in the $200 to $450 range.
How we do it
We run a camera down each flue, check the liner joints and damper, and photograph every defect we find so you can see it yourself.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is the right call after a chimney fire, before an appliance change, or when you’re buying a Burnsville home and need documentation of the system’s condition.
What it costs in Burnsville
Expect a typical range of $200 to $450, depending on how many flues the chimney serves and whether camera access is straightforward.
How we do it
We inspect every accessible flue and the chimney exterior, then issue a written report usable for a real estate transaction or an insurance requirement.
What Chimney Inspection Costs in Burnsville
| Item | Typical range in Burnsville |
|---|---|
| Standard inspection | $125 – $275 |
| Camera-scoped inspection with written report | $200 – $450 |
| Level 2 inspection | $200 – $450 |
Does a Burnsville chimney inspection include a camera scope?
Yes, when the flue calls for it. We scope the flues on most inspected chimneys here because cracked clay tiles are common in 1960s and 1970s construction and aren’t visible from the firebox. Ask for the camera report when you book.
Can I get a written inspection report for a home sale in Burnsville?
Yes. Every inspection we do comes with a written report documenting the system’s condition, which is what a buyer, lender or insurer usually needs. It records what we found and why it matters, not an upsell.
Brands We Service in Burnsville
Our repair and relining work uses professional-grade components from a set roster: Gelco and Famco for caps and flashing, Olympia Chimney for liner systems, and Copperfield for flue solutions. Nothing is stocked locally; parts are specified per job, so expect a short lead time once the scope is confirmed. You can see the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Burnsville, MN
| Service | Typical range in Burnsville |
|---|---|
| Standard chimney sweep | $150 – $350 |
| Standard inspection | $125 – $275 |
| Camera-scoped inspection | $200 – $450 |
| Level 2 inspection | $200 – $450 |
| Crown repair | $350 – $900 |
| Flue tile crack repair | $400 – $1,200 |
| Relining | $1,800 – $4,500 |
| Damper replacement | $250 – $650 |
What pushes price up in Burnsville is usually access and condition, not size. A multi-flue exterior chimney with spalled crown and failed flashing takes longer than a single straight flue, and a reline costs more than a crack repair. Every job is quoted upfront in a written estimate, and the price you agree to is the price you pay.
Neighborhoods We Serve in Burnsville
We work across Burnsville, from the older split-level streets near the river up through the 1990s colonials toward the south end. We can usually book a visit within the same week across the 55337 and 55306 ZIP codes, and we’ll confirm a slot when you call.
- River Hills
- Skyline
- Crystal Lake
- Heart of the City
- Southcross
Service Area – Cities Near Burnsville
Burnsville sits in a cluster of similar suburbs, and we cover the neighboring cities as well. We work in Apple Valley, MN, Rosemount, MN, Eagan, MN and Inver Grove Heights, MN. The housing stock and freeze-thaw conditions are much the same across them, so the same inspection-first approach applies whether you’re a few miles north or south of Burnsville.
Serving Burnsville, MN – Our Local Coverage Area
We serve Burnsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burnsville
Yes, we cover the entire city, both the 55337 and 55306 ZIP codes. When you call, we’ll confirm a visit slot and tell you what to have ready before we arrive. Call (866) 942-6061.
Sometimes. Structural repair, relining and appliance changes often require one, while a routine sweep usually doesn’t. Your city’s building department can tell you what applies to your address. The written estimate notes whether a permit is needed.
Late fall is the busiest time as homeowners prepare for the heating season, so book early if you can. We answer 24/7, and crews are dispatched Sunday through Friday, 7am to 7pm. We’re closed Saturday.
Call (866) 942-6061 for a free estimate on chimney inspection, sweeping or repair anywhere in Burnsville. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burnsville Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Scott Parker"Showed up when they said they would. That's most of the battle."
- Allen Chen"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Doug Miller