Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Shoreview, MN
Tundra Chimney Sweep provides independent DuraFlex chimney cleaning and service across Shoreview, MN. We work on DuraFlex flexible stainless liners, their top plates, caps and connectors, and we scope what we find before anyone quotes a repair. The difference here isn’t the sweeping itself; it’s that so many Shoreview homes have mid-century flues that were never capped, so the top plate and the glazed lower liner sections get more of our attention than the brush does. Call (866) 942-6061. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Shoreview Residents Choose Us for DuraFlex Service
DuraFlex shows up on a lot of the liners we open up. We know the corrugation profile on sight, we know how a top plate is supposed to sit on a crown, and we know what it looks like when a liner was pulled too tight around an offset. That familiarity is why we can tell you quickly whether your DuraFlex liner needs a full reline or just a new cap assembly and connector.
Across Shoreview, that matters. The housing stock dates mostly to 1960 through 1985, and a lot of it has been through at least one reline already. We connect Shoreview homeowners with independent local professionals who service DuraFlex and specify quality parts that actually fit it. No dealer agreement, no manufacturer badge, no sales script. Our technicians have up to 11 years of experience, and every estimate is free and written per job. We also handle the sweep, the repair and the Level 2 inspection in one visit, so nobody has to chase down a separate inspector after the work is done.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Shoreview
Most of what we find on DuraFlex liners in Shoreview traces back to water and cold, not to neglect. Here are the failures we run into most:
- Rust pitting on the liner’s cold outer surface. In a 1960s or 1970s Shoreview rambler, an uncapped clay flue lets snow in and spring thaw moisture reach the liner. Fasteners and the appliance connector usually show the rust first.
- Compressed or ovalized corrugations. Where a liner was pulled around an offset or through a narrowed flue during the original install, the corrugations crush. Those flattened spots become creosote-trapping ledges, and a standard sweep brush rides right past them.
- Top-plate and cap seal failures. Corroded or generic top plates stop sitting flat on the crown. Meltwater runs behind the liner, rusts the damper and spalls the crown as Shoreview freeze-thaw cycles work on it year after year.
- Glaze creosote on exterior north-wall chimneys. The 1970s split-levels off Hodgson Road often have their chimney on the north wall, where it runs colder. Stage-three glaze bakes onto the lower liner sections and a brush won’t touch it.
- Failed appliance connectors. When the connector no longer seats properly on the liner, flue gases and moisture escape at the joint. We replace it with an OEM component sized to the liner’s corrugation profile.
DuraFlex Service in Shoreview: What Local Conditions Mean for Your Equipment
Shoreview’s mid-century clay flues were commonly built with no cap at all. That single fact shapes almost every DuraFlex job here. Most DuraFlex-lined fireplaces in Shoreview are protected only by whatever top plate the original reline crew set, and after 20-plus years of freeze-thaw, that plate is usually the weak point. A typical scenario: a homeowner in a 1970s Shoreview split-level takes the cap off in fall to sweep and finds creosote glaze black and glassy on the lower few feet of the liner, rust on the damper frame, and a top plate lifted a half-inch off a spalled crown. The usual cause is a cold exterior north-wall chase plus an uncapped flue feeding meltwater behind the top plate all spring. A qualified pro scopes the liner with a Level 2 inspection, removes the glaze with a chemical creosote treatment rather than a brush, re-seats or replaces the OEM top plate and cap, and repoints or coats the crown before the next burn season.
DuraFlex Models & Products We Service in Shoreview
We service the DuraFlex DuraFlex flexible stainless liner systems common in this part of the Twin Cities, including the ReliaGARD Flexible Stainless Liner in round 6″ and 7″, the Stainless Steel Rigid Chimney Liner, the Insulated Flexible Liner Kit, and the Pro Flexible Liner. We’re an independent shop, not affiliated with or authorized by DuraFlex, and we don’t claim factory training. What we do claim is parts knowledge: OEM components like top plates, appliance connectors, cap assemblies and insulation wraps seat correctly on the liner’s specific corrugation profile, where aftermarket pieces often don’t and end up leaking at the crown.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Shoreview
Every DuraFlex job is priced per job, set by the written estimate. We don’t quote a number before we’ve scoped the flue. What drives cost: whether the liner is sound, what condition the top plate and cap are in, whether there’s glaze creosote needing chemical treatment, and how much crown or masonry work is involved. A free estimate includes a Level 2 inspection with a camera, a written report of what we found and why it matters, and a clear line-item price. Nothing gets recommended without camera evidence you can see for yourself. Call (866) 942-6061 to book.
Serving Shoreview, MN – Our Local Coverage Area
We serve Shoreview and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Shoreview
No. Tundra Chimney Sweep is an independent DuraFlex service provider, not manufacturer-affiliated or authorized. We service and repair DuraFlex equipment with quality parts that fit it. We don’t claim factory authorization, and we don’t need it to scope, sweep or repair a liner correctly.
A camera scope is the only reliable way to find out. A Level 2 inspection shows us the full length of the liner, and we can see compression or full ovalization where it was pulled around an offset or through a narrowed flue. If we find it, we show you the footage and explain whether the ledge is trapping creosote badly enough to need correction. Call (866) 942-6061 to book a scope.
Because an exterior north-wall chase runs colder than an interior flue, so the smoke cools faster and stages glaze creosote harder. Combined with a flue that may never have had a proper cap, that cold chase is the reason stage-three glaze builds on the lower liner sections where a standard sweep can’t reach it. We remove that with chemical creosote treatment, not a brush.
Yes. A DuraFlex liner needs a cap and top plate sized to the liner itself, not a generic cap made for an unlined clay flue. A cap that doesn’t match the liner’s profile lets meltwater run behind the plate. We fit OEM DuraFlex cap assemblies and top plates meant for your liner.
Just the plate, if the liner is sound. We scope first to confirm the liner isn’t crushed, rusted through or undersized, and if it’s clear we replace the failed OEM top plate and cap and leave the liner in place. Call (866) 942-6061 for a free estimate, and we’ll show you on camera what we found.
Service Areas Near Shoreview
We serve Shoreview and the surrounding Twin Cities communities, including St. Paul, Maplewood, North St. Paul, Oakdale, and Vadnais Heights. If you’re in Shoreview or nearby, we can get a technician out to scope your DuraFlex system. Just give us a call to check availability.
Book Your DuraFlex Service in Shoreview Today
Ready to know what’s actually going on with your DuraFlex liner? Call (866) 942-6061 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll scope the flue, show you what we find, and write a clear estimate before any work begins.
Written by the team at Tundra Chimney Sweep.