Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Stillwater, MN
We provide independent DuraFlex service across Stillwater, and the work here is shaped by one fact more than any other: many of the chimneys we open in this city predate the liner inside them by a century. DuraFlex makes a flexible stainless steel chimney liner, and cleaning one properly means checking what it’s sitting in as much as what’s coating it. Our technicians have up to 11 years of experience, work with genuine DuraFlex components, and we’re an independent service provider, not authorized, endorsed, or affiliated with DuraFlex. Call (866) 942-6061 for a free estimate.
Why Stillwater Residents Choose Us for DuraFlex Service
DuraFlex liner systems show up in a lot of Stillwater homes, both on the bluffs and in the older blocks near the river, and the systems age in ways that a quick brush-and-go sweep won’t catch. We know where these liners tend to kink, where the top plate tends to rust, and how a spalled clay tile behind a liner changes the whole picture.
We use genuine DuraFlex components for liner connections, caps, and top plates because the system only holds integrity if the parts match. A mismatched top plate or a cap that doesn’t seat right undoes the liner work underneath it.
As an independent shop, we’re free to tell you when a liner can be repaired rather than replaced. Localized kinks and rust get fixed. A liner that’s crushed, corroded through, or fails a Level 2 inspection gets replaced, and we’ll show you why. Scheduling is straightforward: call, get a time, and we’ll book around Stillwater’s steep rooflines and tight lots when access needs extra attention. We answer 24/7. Fast dispatch, 7am-7pm.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Stillwater
- Kinked or crushed liners at offset bends. In 19th-century Stillwater chimneys, original flue tiles are uneven or spalled, so a flexible stainless liner can crush against them at the offset. That restricts draft and traps creosote in sections a brush can’t clean evenly.
- Rusted liner tops and debris from degraded mortar. Freeze-thaw cycles in Stillwater force water into cracks around the top plate and cap. Rusted liner tops and crumbling mortar joints drop debris onto the liner, which is why cap installation and top plate checks matter here.
- Shifting or degraded insulation wrap. Insul-Flex wrap can shift after heating and cooling cycles, leaving gaps that cut efficiency and let creosote build in hidden sections. When we sweep, we check the wrap as part of the job.
- Blocked abandoned flues in shared chimneys. Stillwater’s historic district has plenty of internal and rowhouse-shared chimneys with second flues that were sealed off years ago. Bird nests and debris in those blocked flues can choke airflow around a properly installed DuraFlex liner, causing smoke spillage into the living space.
- Creosote in wood-insert setups. A wood insert running hard through a Stillwater winter builds creosote faster than an open fireplace, and glazed deposits along a DuraFlex liner take more than a light brush to remove. Creosote removal is the reason to book a sweep before the heating season starts, not after.
DuraFlex Service in Stillwater: What Local Conditions Mean for Your Equipment
The historic downtown and the bluffs around it are full of 19th-century brick and masonry chimneys built for wood and coal. Many are internal to the structure or shared between adjacent rowhouses, and a fair number have a flue that was sealed off or repurposed over the decades. Technicians working in these homes regularly find abandoned flues, sometimes closed for years, that have to be cleared and capped before a DuraFlex liner can be safely used. That’s the part of the job no generic page tells you about: if you own one of these homes and your liner was installed without anyone checking the second flue, you may be getting smoke spillage that has nothing to do with the liner itself. It’s also where access gets tricky. The steep rooflines and tight lots on the hill often call for special ladder work or roof anchors that newer suburban builds never need, and heavy snow on a steep pitch can put the work off until the roof is clear or staged safely. Cleaning here is as much about assessing liner integrity and firebox condition as it is about sweeping creosote.
DuraFlex Models & Products We Service in Stillwater
We clean, inspect, repair, and install the range of DuraFlex liner systems found in Stillwater homes. That includes ReliaFlex 316L stainless steel liner kits, ProFlex 304L alloy liners used with wood inserts, Insul-Flex insulation wrap kits, and DuraFlex chimney cap and crown systems. Each component gets checked on its own terms: the liner for kinks and corrosion, the wrap for shifting and gaps, the cap and top plate for water damage.
Parts selection is where a lot of jobs succeed or fail. We use genuine DuraFlex components for connections, caps, and top plates so the system stays within its own tolerances. We don’t stock or warehouse parts, and we’re not a DuraFlex dealer, but we can source what fits your specific liner and appliance setup. When a liner is damaged only at one spot, we recommend repairing it with matching components rather than ripping out a sound system.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Stillwater
DuraFlex work is priced per job by a written estimate, and the estimate is free. What drives the number is the condition of the flue behind the liner, how much creosote has to come out, whether access needs special ladder work or roof staging, and whether you need a repair, a partial section replacement, or a full liner replacement. A Level 2 inspection with camera documentation tells us which of those you actually need, and you see the footage before we quote anything.
- Level 2 inspection with camera and written report: quoted per job after the estimate
- Creosote removal and sweep: priced by liner condition and deposit severity
- Cap installation with genuine DuraFlex components: quoted by flue size and access
- Liner repair or section replacement: priced after inspection confirms the damage
If a liner is kinked or rusted in one spot, we’ll tell you it can be repaired. If it’s crushed or failing, we’ll show you why replacement is the right call. Call (866) 942-6061 for an exact quote, since estimates are free. Ask about our service options and current pricing when you call.
Serving Stillwater, MN – Our Local Coverage Area
We serve Stillwater and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Stillwater
A Level 2 inspection is a camera-based look inside the flue that documents the liner’s condition in writing. Your Stillwater home needs one before cleaning because the clay tiles behind the liner can be spalled or shifted, and the camera shows us what a brush can’t. We do the inspection in the same visit as the sweep, and you get a written report you can use for insurance or a real estate transaction.
Yes, we can, provided the liner itself is intact. Cracked clay tiles are common in older Stillwater masonry and aren’t automatically a reason to reline, but a liner running through deteriorated tiles needs a careful check for kinks, corrosion, and debris from crumbling mortar. If the damage to the liner is localized, we repair it. Call (866) 942-6061 and we’ll book a camera inspection to confirm the liner’s condition.
They rust at the top because freeze-thaw cycles force water into cracks around the top plate and cap, and that moisture sits against the stainless steel. Stillwater’s winters give water plenty of chances to get in and freeze. Fixing the cap and top plate seal is often enough to stop it, and that’s one reason a proper cap installation matters more here than in milder climates. Call for an inspection if you see rust or water staining near the chimney top.
Leave the second flue alone until a technician can check it, because a sealed-off flue in a shared Stillwater chimney often holds bird nests, debris, or old soot that can block airflow around your active liner. We clear and cap unused flues as part of the job so the active one drafts correctly. Call (866) 942-6061 to have both flues looked at in one visit.
A wood insert in a Stillwater home should be swept about once a year, or more often if you burn heavily through the heating season. Inserts run hot and build glazed creosote faster than an open fireplace, and that deposit is hard to remove once it hardens along a liner. Call (866) 942-6061 for an exact quote on a sweep and inspection, and we’ll tell you plainly whether the work can wait a season.
Service Areas Near Stillwater
We serve homeowners in Stillwater and the towns around it, including Lake Elmo, North St. Paul, Oakdale, Maplewood, and South St. Paul. If you’re just off the bluff or out toward the outskirts, call (866) 942-6061 and we’ll confirm service to your address.
Book Your DuraFlex Service in Stillwater Today
Whether you need a sweep, a Level 2 inspection, a cap installed, or a liner repaired, we’ll give you a straight read on what the flue needs. Call (866) 942-6061 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. No work gets booked until you’ve seen the camera findings and agreed to the price.
Written by the team at Tundra Chimney Sweep.