Chimney Repair in Stillwater, MN | Tundra Chimney Sweep

Chimney Repair in Stillwater - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Stillwater

Stillwater’s chimneys were built for a different century of heating, and they show it. The brick stacks on the hill above the river hold up to freeze-thaw winters that split mortar and pop brick faces, and the tightly packed lots downtown mean roof access is its own problem before anyone touches the masonry. We work Stillwater regularly enough to know that a chimney repair here starts with figuring out what the house was originally built to do, not with a sales pitch about a new liner. Our technicians have up to 11 years of experience, and the whole job runs on a written inspection report and a written estimate. Call (866) 942-6061 to book. We answer 24/7.

Call (866) 942-6061

Why Stillwater Homeowners Call Tundra Chimney Sweep for Chimney Repair

Stillwater is not a suburb where every chimney is a 1990s prefab with a clean chase. It’s a river town with 1850s to 1900s Italianate and Queen Anne homes packed into the historic district, mid-century builds scattered across the bluffs, and newer construction out past the edges. Each of those needs a different set of tools and a different set of assumptions, and we scope repairs to the actual house instead of running the same script on every stack.

We work with professional-grade product lines: Gelco and Famco caps and flashing for terminations that actually shed water, Copperfield and Olympia Chimney components where the metalwork has to be rebuilt, HeatShield for resurfacing a deteriorated flue without tearing out a century-old clay liner, and DuraFlex flexible liners where the flue has to be relined to serve a modern appliance. That range matters on the older downtown houses, where a sweep-only shop ends up referring out half the job.

Our inspection documents the condition of the whole system in writing, which is useful whether you’re buying a house, renewing insurance, or just want a clear answer about what needs doing and what can safely wait. Every estimate is free, and the written estimate sets the price.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Flashing Repair in Stillwater

Chimney Flashing Repair in Stillwater almost always starts with water, because the flashing is the one piece of the chimney that has to keep a brick stack and a roof from leaking into each other. When it’s done right, the metal steps into the brick courses, overlaps the shingles correctly, and turns meltwater away from the masonry. When it’s done badly, or when it’s simply 40 years old and rusted through, water enters at the roof line and freezes just under the brick face over winter. A typical flashing repair here runs $350 to $1,200, with a full re-flash on a shared or complicated stack toward the high end.

Step and counter-flashing on a steep roof

On the bluffs, the roof pitch and the snow load often make a simple ladder set-up impractical, and a technician may need roof anchors or staging to reach the flashing safely. That affects how the repair is scheduled, not what the metal has to do once it’s on.

Rebuilding the roof-to-masonry joint

The old flashing has to come out, the masonry has to be checked for a failed crown above it before anyone closes the joint, and the new metal has to be embedded and sealed into a proper reglet or counter-flash. Skipping the crown check is how a flashing repair gets redone two winters later.

Chimney Crown Repair in Stillwater

Chimney Crown Repair in Stillwater is where we spend most of a repair season, because the crown is the top of the masonry and the place where water gets in. A cracked, spalled or missing crown lets meltwater down into the brick and mortar of the flue chase, where a freeze-thaw cycle pries the masonry apart from the inside. A typical crown repair here runs $450 to $1,400, with a full crown rebuild on a large multi-flue stack toward the high end.

Overlay versus a full rebuild

A thin overlay can save a sound crown with surface cracking, but once the concrete has broken away at the flue edge, the crown has to be rebuilt over the flues with a proper overhang and slope. We specify the crown mix for a cold-weather cycle, not a mild-climate one.

Sealing the flue-to-crown transition

Where the flues come up through the crown, the seal is where the water usually gets in first. A new crown with a badly sealed flue joint just moves the leak a few inches.

Trusted Brands We Service in Stillwater

We work with a curated set of professional-trade chimney brands so the repair matches the failure, not whatever’s on the shelf. Gelco and Famco supply the caps and flashing that keep a Stillwater stack dry through the freeze-thaw cycle, Copperfield and Olympia Chimney handle the metal terminations and liner components where the old setup has to be rebuilt, HeatShield lets us resurface a deteriorated clay flue without demolishing it, and DuraFlex covers the relining jobs that end up being more than a straightforward sweep. We don’t claim to stock parts locally, but we specify correct components and get them to the job rather than substituting a hardware-store part. Every repair is scoped by the inspection report first.

Common Chimney Repair Problems We See in Stillwater Homes

  • Shared and internal flues in the historic district. Many downtown rowhouse and attached-property chimneys run through the structure or share a stack with a neighbor, so a repair on one side can reach into the other’s flue. Before any crown or flashing work, we confirm which flue serves which appliance and whether a neighbor’s furnace or water heater is venting into the same stack.
  • Water-intrusion cross-contamination on a shared stack. A failed crown or flashing on a shared chimney lets water into both flues, so a small leak on one side of the stack shows up as spalled brick and eroded mortar on the neighbor’s side. That’s why the diagnosis has to cover the whole stack, not just the visible face.
  • Cracked clay tile liners that draw fine until they don’t. On 100-plus-year-old masonry, a fireplace can pull a decent draft on a mild day while the flue still has gaps the eye can’t see from the hearth. A Level 2 inspection is the only way to find tile gaps that compromise draft and let creosote reach the brick.
  • Abandoned and sealed internal flues. Historic-district homes often carry flues that were capped or repurposed over the decades, and a missing cap lets bird nests and debris collect inside. The blockage usually shows up as smoke backing into the living space the first time someone lights a fire.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Repair in Stillwater, MN

Chimney repair in Stillwater is priced per job by a written estimate, and the estimate is free. A typical masonry repair such as repointing or tuckpointing a deteriorated joint runs $300 to $900. A flashing repair runs $350 to $1,200. A crown repair or rebuild runs $450 to $1,400. Chimney waterproofing is typically a $300 to $900 add-on to a repair. Full chimney rebuilding on a failed stack is the largest scope of work and is priced only after inspection. What moves the number: the pitch and access on a bluff property, whether the stack is shared with a neighbor, and whether the flue has to be relined at the same time. The written estimate sets the final price, and nothing is recommended without camera evidence you can see.

We Also Serve Cities Near Stillwater

Chimney repair across the lower St. Croix valley runs out to the surrounding towns, and we cover the ones that sit closest to Stillwater. Homeowners in Lake Elmo, North St. Paul, Oakdale, and White Bear Lake get the same inspection-first process and the same written estimate. If you’re on the edge of one of those and unsure whether we cover you, call and we’ll tell you straight. Call (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Serving Stillwater, MN – Our Local Coverage Area

We serve Stillwater and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Stillwater

How a Typical Chimney Repair Goes in a Stillwater House

A homeowner on a 19th-century Stillwater rowhouse notices efflorescence and spalling brick around the chimney crown and assumes the top needs repointing. The actual problem is often a failed crown and flashing letting meltwater into the masonry, where it freezes and pops the brick face over winter. A qualified local pro runs a Level 2 inspection, confirms which flue serves the wood fireplace versus the neighboring furnace, checks the flue liner for cracked clay tile and the smoke chamber and damper for obstructions, then rebuilds the crown and re-flashes it rather than just tuckpointing the visible damage. On the bluffs, the same diagnosis can require roof anchors or staging because the steep pitch and snow load make a simple ladder set impractical. If the visible damage is on both sides of a shared stack, that alone tells us the crown or flashing has been failing for more than one season.

Book a Chimney Repair in Stillwater

If you’ve got a leak, spalling brick on the stack, a crown that looks broken at the edge, or smoke that backs into the room on a cold night, the repair starts with a proper inspection and a written report you can read for yourself. Our technicians have up to 11 years of experience, and our chimney repair work is scoped to last the heating season, not the mild weeks. Call (866) 942-6061 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturdays.

Written by the team at Tundra Chimney Sweep.

Why Stillwater Chooses Tundra Chimney Sweep

We set the standard for chimney repair in Stillwater.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Stillwater

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Stillwater Customers Say

Trusted by homeowners across Stillwater and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Scott Parker
★★★★★

"Showed up when they said they would. That's most of the battle."

Allen Chen
★★★★★

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

Doug Miller

Ready for Chimney Repair in Stillwater?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Stillwater.

(866) 942-6061

Request a Free Estimate in Stillwater

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7