Chimney Repair in St. Paul, MN | Tundra Chimney Sweep

Chimney Repair in St. Paul - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across St. Paul

Chimney repair in St. Paul is different work from what you’d find fifteen minutes west in a newer suburb. Most of the city’s housing stock went up between the 1890s and the 1930s – brick four-squares, Victorian-era homes along the bluffs, and dense duplexes packed onto narrow lots – and those chimneys were built to last a century, then quietly started to fail right around now. We know what roof access looks like on a tight East Side street, and we know why a repair on one unit often reaches into the stack next door. Our technicians have up to 11 years of experience, and we bring professional-grade materials to every job. Call (866) 942-6061 for a free estimate.

Call (866) 942-6061

Why St. Paul Homeowners Call Tundra Chimney Sweep for Chimney Repair

We’re a chimney specialist, not a generalist handyman outfit, and that matters most on the older masonry this city is full of. Our reputation around St. Paul comes from telling people straight what a flue needs and what can safely wait – and then specifying materials that hold up under a real Minnesota heating season, not just through a mild January.

Our technicians have up to 11 years of experience working on exactly this kind of masonry. Here’s what a technician finds, and why it matters: spalled clay tile, cracked crowns, dampers rusted shut from years of water intrusion. We also handle sweep, repair, and inspection as one scope, so you’re never sent to a separate inspector after repairs are finished – the same team documents the system condition in writing before and after.

We work with a curated roster of professional-grade brands – DuraFlex, HeatShield, Olympia Chimney, Famco, Copperfield, and Gelco – and we source them because a repair has to be right the first time in a climate that runs furnaces and wood stoves five to six months a year. Fast dispatch from 7am to 7pm, Sunday through Friday. We answer 24/7 at (866) 942-6061.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Installation in St. Paul

Chimney cap installation in St. Paul is one of the repairs that pays for itself fastest, because our long freeze-thaw cycles are relentless on exposed masonry. A properly fitted cap keeps rain, snow, squirrels, and nesting birds out of the flue – and stops the water intrusion that turns into spalling brick and rusted dampers down the road. When a St. Paul homeowner needs one: an open flue with no cap, a cap that’s missing its screen, or a new liner install that needs a correct termination. A typical cap installation runs $300 – $650, depending on flue size and whether the crown needs attention too.

Correct Termination and Fit

A cap has to match the flue’s actual dimensions and the appliance venting into it. We fit Famco and Gelco caps because they close tightly over the crown and hold up to snow load and freeze-thaw without warping or lifting at the corners.

Stainless Caps for Wood and Gas

A wood insert or gas appliance vents differently than an open masonry fireplace, and the cap needs to match that draft profile. For demanding applications we specify Copperfield stainless multi-flue caps built to shed snow and stay secure through the season.

Chimney Cap Replacement in St. Paul

Chimney cap replacement in St. Paul usually comes down to a cap that’s failed on an older chimney – rusted through, dented by a falling limb, or simply lifted loose by years of ice. When ice gets under a poorly seated cap, it heaves it up and twists the screen; once the seal is compromised, water finds the crown and the flue. A St. Paul homeowner needs a replacement when the cap no longer sits flush, the screen is torn, or animals have gotten past it. Typical replacement runs $250 – $550 for a standard flue, more for a large multi-flue stack.

When the Crown Goes With It

A cap that’s failed has usually let water into the crown below it. We check the crown during any cap replacement – a cracked crown resealed now is far cheaper than repointing later. That’s a call worth making in fall, before the hard freeze.

Roofline Access on the Bluffs

Streets along the bluffs and the tight lots on the East Side mean some caps are only safely reached with proper roof equipment and fall protection. We set up for that access rather than working a cap from a ladder in weather.

Trusted Brands We Service in St. Paul

The brands we install are the ones commercial chimney contractors rely on, and we’ve chosen them for cold-weather performance. HeatShield lets us resurface a deteriorated flue liner without full demolition when the tile is still sound. DuraFlex and Olympia Chimney flexible stainless liners handle the demanding relining jobs – oil-to-gas conversions and oversized masonry flues that sweep-only companies often decline. Copperfield and Famco carry the cap and flashing side of the work, and Gelco covers cap solutions that fit tight. We don’t stock parts; we specify the correct component for your flue and source it, keeping turnaround quick. If you want to know exactly what your chimney needs, that conversation starts with a call.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in St. Paul Homes

This city’s working stock skews old and masonry-heavy, so the failure modes here follow the housing. In a St. Paul four-square or duplex, a repair call that starts as a cleaning often turns into a relining evaluation once the technician looks up the flue. Here’s what we run into most.

  • Original clay tile liners that spall and shed debris. A century of freeze-thaw on an unsealed crown lets water into the masonry, and the tile flakes. A cleaning then reveals gaps that need relining rather than a brush-out.
  • Shared or cross-connected flues between duplex units. In old brick buildings around the East Side and Dayton’s Bluff, one stack often serves more than one unit, so a neighbor’s appliance can vent into your flue. That’s a backdraft and carbon-monoxide risk, and it has to be coordinated with the adjacent owner.
  • Unsealed or cracked crowns and failing flashing on bluffs-side Victorian masonry. Water gets in at the top, and it shows up as spalling brick and rusted dampers, not a draft complaint. The wet spot travels before anyone notices it.
  • Creosote-glazed flues on wood-burning inserts. Inserts that ran hard through a Minnesota winter build creosote faster than a milder climate produces. A spring sweep catches the glaze before it can catch.

Pricing for Chimney Repair in St. Paul, MN

We give you a written estimate before any repair is booked, and the estimate sets the final price per job. Here are typical St. Paul ranges to give you a sense of the market. Mortar repointing runs $450 – $1,200 depending on how much of the stack is affected. Spalling brick repair is $400 – $1,100 for a typical section, more on a large Victorian chimney. Chimney waterproofing runs $350 – $800. Flashing repair is $300 – $750. A chimney rebuild – when the masonry above the roofline is beyond repair – runs $2,500 – $8,000. Tuckpointing falls in the same range as repointing, priced by the square footage of joint work. What moves the number: roof access on a tight street, the height of the stack, and whether the crown needs attention alongside the repair. The estimate is free – call (866) 942-6061.

We Also Serve Cities Near St. Paul

We work across the metro around St. Paul, including Maplewood, South St. Paul, North St. Paul, and Oakdale. If you’re in one of the surrounding communities, the same professional-grade materials and honest assessment apply. Call (866) 942-6061 to book a free estimate in any of these cities, or to ask whether your home is in range.

Serving St. Paul, MN – Our Local Coverage Area

We serve St. Paul and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in St. Paul

Why St. Paul Chooses Tundra Chimney Sweep

We set the standard for chimney repair in St. Paul.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in St. Paul

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What St. Paul Customers Say

Trusted by homeowners across St. Paul and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Scott Parker
★★★★★

"Showed up when they said they would. That's most of the battle."

Allen Chen
★★★★★

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

Doug Miller

Ready for Chimney Repair in St. Paul?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in St. Paul.

(866) 942-6061

Request a Free Estimate in St. Paul

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7