Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Mounds View
If your fireplace is smoking into the room or your chimney crown is crumbling, we handle chimney repair in Mounds View for the people who actually live here. We know the housing stock: late-1940s through 1970s ramblers and split-levels around the original core, most still carrying the brick fireplace and clay-tile flue that came with the house. That’s a repair-and-relining market, not a clean-and-go one, and it takes a technician who reads the whole system. Call (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Mounds View Homeowners Call Tundra Chimney Sweep for Chimney Repair
Mounds View is a built-out suburb, which means the work here is diagnosis, not new construction. Our technicians have up to 11 years of experience, and the patterns on these streets repeat often enough that we go straight to the likely failure: cracked tiles, mortar joints that have opened up, a crown that has separated from the masonry after another hard freeze.
Every repair starts with an inspection that documents what we found and why it matters, in writing. Nothing gets recommended that you can’t see for yourself in the report, and we say plainly when work can wait. We’re licensed and insured, and the flat-price sweep you book is the flat-price sweep you pay, agreed before we start.
Our technicians are equipped for a full scope: sweep, repair, and inspection. You don’t get handed off to a separate inspector once repairs are done. For Mounds View that matters, because the flue, the cap, and the crown fail together far more often than they fail one at a time. We serve Mounds View and the surrounding north-metro neighborhoods with that same approach, and we’re glad to talk through what your chimney actually needs before anyone touches a wrench.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Mounds View
Chimney Masonry Repair in Mounds View usually means stopping water before it turns a repointing job into a rebuild. On the postwar brick chimneys here, repeated freeze-thaw cycles push moisture into the mortar and the crown, and once it freezes the brick face spalls off. A typical masonry repair in Mounds View runs $350 – $900 for repointing and waterproofing, $500 – $1,200 for chimney crown repair or flashing, and $2,000 – $6,000 if the chimney needs a partial rebuild. The written estimate sets the final price.
Repointing and Tuckpointing
We grind out deteriorated mortar to a consistent depth and pack in fresh material matched to the original joint profile, so the repair moves with the masonry instead of cracking away from it. On a Mounds View chimney that has been through several decades of hard winters, this is often the difference between sealing the problem and chasing it for years.
Crown and Flashing Sealing
The crown and the flashing are where most water gets in, and both fail quietly. We rebuild a cracked crown and re-seat flashing at the roofline, then finish with a breathable waterproofing coat that keeps liquid water out while letting the masonry dry from inside.
Chimney Cap Installation in Mounds View
Chimney Cap Installation in Mounds View is the cheapest protection you can put on a chimney, and it’s the one most often skipped. A properly fitted cap keeps rain, snow, and animals out of the flue while letting smoke and gases escape. A typical cap installation in Mounds View runs $250 – $650, depending on whether it’s a single-flue masonry chimney or a factory-built unit that needs a manufacturer-matched prefabricated chase cap. The estimate is free, and the price is set in writing.
Masonry Chimney Caps
We fit stainless multi-flue caps with a full mesh screen, sized to the actual flue opening rather than a stock size that sits loose. That’s how you stop the water intrusion that starts the spalling in the first place.
Factory-Built Chase Caps
Prefabricated fireplaces in the newer infill and townhome units on Mounds View’s edges need the cap specified for that chase, not a generic lid screwed over the top. We match the cap to the manufacturer’s requirements so the termination stays sealed and the chase stays dry.
Trusted Brands We Service in Mounds View
We specify and install professional-grade components because a cold-weather chimney isn’t a place for whatever the shelf has in stock. On Mounds View repairs we work with Olympia Chimney liners and caps, Famco caps and flashing, and Copperfield components, matching each part to the appliance and the flue it actually serves. We don’t claim to stock parts locally. What we do is specify the right component, order it, and install it correctly, so the turnaround stays reasonable and the fix holds through a full heating season. Every material choice comes with a one-line reason you can check against your report.
Common Chimney Repair Problems We See in Mounds View Homes
- Cracked clay-tile flue liners. The original tiles in 1940s to 1970s ramblers lose mortar joints and crack from decades of freeze-thaw, so the fireplace drafts poorly even though it looks fine from the hearth.
- Spalling brick and separated crowns. Water gets into the masonry, freezes, and pops the brick face off, which is why crowns and flashing on aging Mounds View chimneys let moisture in long before anyone notices.
- Generic parts in factory-built fireplaces. The newer townhome and infill units need manufacturer-specific components and prefabricated chase caps, and a generic substitute often leaks or won’t fit right.
- Heavy creosote from wood burning. Long Minnesota winters mean sustained burning, so the flue builds creosote fast and needs an annual sweep before fall startup, not after the first smoke spillback.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Mounds View, MN
Chimney repair in Mounds View runs from a $200 – $450 sweep and inspection at the low end to $3,500 – $7,000 for a full stainless relining on a masonry flue. Repointing, crown repair, and waterproofing sit in the $350 – $1,200 range, cap installation runs $250 – $650, and a partial rebuild climbs into the thousands. What moves the number is access to the flue, whether the liner is resurfaced with HeatShield or fully relined, and how much water damage the masonry has taken. Nothing is recommended without camera evidence you can review. Estimates are free, so get one before you decide anything. Call (866) 942-6061.
We Also Serve Cities Near Mounds View
We work the north-metro corridors around Mounds View, including Shoreview, Blaine, Lino Lakes, and Vadnais Heights. The housing stock and the freeze-thaw patterns are similar across these cities, so the diagnosis and the repair approach carry over. If you’re just outside Mounds View, call and we’ll confirm coverage. Our chimney repair team handles the same scope for every one of them.
Serving Mounds View, MN – Our Local Coverage Area
We serve Mounds View and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Mounds View
Because a fireplace that worked last winter can still be unsafe this winter. On these ramblers, the original clay tiles crack and mortar joints open from repeated freeze-thaw, and the damage stays hidden behind a hearth that looks perfectly normal. Call (866) 942-6061 for a free estimate and an inspection that documents what we find.
Yes. Factory-built fireplaces have their own service life and require manufacturer-specific parts and a prefabricated chase cap matched to the unit. Generic substitutions often leak or won’t seat correctly, so a newer chimney still needs inspection even when nothing looks old. Call (866) 942-6061 for an exact quote.
A camera inspection tells you. If the clay tiles are cracked or missing joints through the length of the flue, relining is the path. If the flue is sound but the crown, flashing, or brick face has taken water damage, masonry repair handles it, and HeatShield resurfacing can sometimes restore a liner without full removal. Call (866) 942-6061 and we’ll show you the evidence.
Glazed, tar-like creosote is the kind that matters most, because it ignites readily and doesn’t brush off easily. Long heating seasons with steady wood burning build it faster here than in milder climates, so an annual sweep before fall startup keeps it from accumulating. Call (866) 942-6061 to book a sweep and inspection.
It stops the water that starts most of them. A properly fitted cap keeps rain and snow out of the flue, and combined with crown and flashing repair it protects the masonry before freezing damages it further. It won’t reverse spalling that’s already happened, so we recommend it alongside masonry repair. Call (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get a Free Chimney Repair Estimate in Mounds View
Whether you’re in a postwar rambler near the original core or a newer townhome on the edges, the place to start is a real inspection and a written estimate. We’ll show you what we found, tell you what can wait, and price the repair per job so there are no surprises. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (866) 942-6061 today for a free estimate.
Written by the team at Tundra Chimney Sweep.