Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Blaine
If your chimney cap is loose, your crown is cracked, or you’re not sure what’s inside the flue, we’re the team Blaine homeowners call for straight answers and repair work done right. We’re Tundra Chimney Sweep, and we work across the northern metro every week. Blaine spreads wide, from the 55449 subdivisions out toward the edge of the city, so we plan routes with drive time in mind and dispatch runs 7am to 7pm, Sunday through Friday. A technician who knows prefab fireplaces and stainless liners will look at your system, show you what’s happening with photos, and quote the repair in writing. Call (866) 942-6061. We answer 24/7.
Why Blaine Homeowners Call Tundra Chimney Sweep for Chimney Repair
Blaine’s housing is mostly 1990s and 2000s tract construction, and that shapes what we do here. These are factory-built fireplaces on metal flue systems, not the masonry chimneys you find closer to the city core. Many of them have never had a proper camera inspection, only a brush run down the flue. We come at repair work from an inspection first: what’s actually there, what the appliance is rated for, and what the manufacturer’s clearances allow.
Homeowners in Blaine tend to be skeptical of the upcharge conversation, and that’s fair. We photograph the smoke chamber, the damper, and the flue interior, and you see the images before any work is recommended. We work with professional-grade materials – Olympia Chimney liners, Famco and Copperfield caps and flashing – because a repair that fails in a hard January freeze costs more than doing it right. Our technicians have up to 11 years of experience, and our inspections document system condition in writing, which matters if you’re selling or dealing with an insurer. For chimney repair in Blaine, we quote the job in writing before we start, and that written price holds.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement in Blaine
Chimney Cap Replacement in Blaine usually starts with a simple complaint: a draft that wasn’t there last winter, water stains on the ceiling near the flue, or a telltale rattle in wind. Cap replacement means removing the old termination, inspecting the flue top and crown for cracks, and fitting a properly sized cap that keeps rain, snow and animals out while allowing the flue to breathe. On a Blaine home with a metal flue, the cap is the first thing freeze-thaw cycling damages. A typical cap replacement runs $250-$600, and a crown repair alongside it adds $300-$700. We use Famco and Copperfield caps sized to your flue. Estimates are free.
Sizing a Cap to a Prefab Flue
A cap from a hardware store rarely fits a factory-built flue correctly. The gap between the flue collar and the cap matters more than the look of the thing, and an undersized cap lets snow blow in and melt down the flue. We measure the actual termination and specify a cap built for that diameter.
Repairing the Crown and Flashing
Water damage often starts where the cap was never properly seated. Once the cap is off, we check the crown and the step flashing at the roof penetration. Copperfield flashing and a properly sloped crown stop the water before it reaches the interior.
Chimney Liner Installation in Blaine
Chimney Liner Installation in Blaine is often the fix when a prefab firebox has flue damage that sweeping can’t solve – cracked liner sections, gaps at the joints, or a flue that was never the right size for the appliance. A new liner means running a listed, properly sized system from the firebox collar up through the top. On a two-story Blaine home this is a scheduled job, usually half a day to a full day. A typical liner installation runs $2,500-$5,000 depending on flue length, appliance type and access. HeatShield resurfacing, when the existing flue is sound but pitted, can run $1,800-$3,500. Estimates are free.
When a Liner Is the Right Answer
Not every flue with a stain needs a new liner. A camera inspection shows whether the existing liner is intact. If it is, we say so. If the joints are compromised or the sizing is wrong for the appliance, a liner is the safer path.
Resurfacing Before Replacing
HeatShield application lets us resurface a deteriorated flue liner from the inside, without tearing out the existing system. We’re certified to apply it, and it’s a real cost saving where the underlying flue still has integrity. You get a written report with photos either way.
Trusted Brands We Service in Blaine
We work with professional-grade product lines because they’re specified for cold-weather performance, not because the logos look good. For Blaine, our most common specifications are DuraFlex flexible liners for appliance conversions and masonry flue upgrades, Olympia Chimney liner systems where the flue geometry calls for them, and Copperfield or Famco for terminations and flashing. We don’t carry parts on a truck. What we do is source the right material for your flue and get it scheduled without a runaround. That matters when a cap or liner needs to be fitted before the freeze sets in. Turnaround on most repair jobs is quick once the estimate is approved.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Blaine Homes
- A prefab flue swept like it’s masonry. Factory-built fireplaces on stainless flues need a proper brush sized to the flue and a camera look at the smoke chamber. A generic brush run down a metal flue can scratch the liner and skip the buildup that actually matters.
- Glazed creosote from green firewood. Blaine’s signature issue is a flue glazed with third-degree creosote from burns of partly seasoned wood. That’s a chimney fire risk inside a firebox that isn’t rated for it, and it doesn’t come off with a standard sweep.
- Freeze-thaw damage to the cap and crown. Long Minnesota winters with heavy snow loads crack crowns and loosen caps before anyone notices a draft inside. Water gets in, the flue sweats, and a small repair becomes a bigger one.
- Flashing that’s dried out or missing. Roof penetrations on these homes are past the warranty window, and flashing that has failed lets water track down the exterior of the flue. We photograph it so you can see what’s happening.
Pricing for Chimney Repair in Blaine, MN
Blaine prices are typically close to the metro average and slightly below the older core suburbs, because most repair work here is on prefab systems rather than masonry rebuilds. A typical cap replacement on a Blaine home runs $250-$600. Crown repair runs $300-$700. HeatShield resurfacing, when the flue qualifies, runs $1,800-$3,500. A full liner installation runs $2,500-$5,000. Masonry repointing, when a home does have a masonry chimney, runs $600-$1,500 depending on the run length. These are estimates, not quotes. The written estimate you receive after inspection is what sets the final price. We don’t do a service-call fee, and the estimate is free. Call (866) 942-6061.
We Also Serve Cities Near Blaine
Our work reaches well beyond the city limits. We repair chimneys in Lino Lakes and Mounds View to the east, Shoreview to the southeast, and Vadnais Heights where the northern metro meets the inner ring. Homeowners across this part of Blaine’s surrounding communities get the same camera inspection, written report and flat estimate agreed before booking. The drive times shift, but the process doesn’t.
Serving Blaine, MN – Our Local Coverage Area
We serve Blaine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Blaine
Yes. A factory-built fireplace on a metal flue needs annual sweeping and inspection exactly the way a masonry chimney does, and often more urgently. The metal flue has less thermal mass and tolerates glazed creosote poorly. Call (866) 942-6061 for a scheduled sweep and we’ll tell you what we find.
You can’t tell from the firebox – it takes a camera and a trained eye. First-degree creosote is soot-light and comes off with a normal sweep. Third-degree is glazed, hard, and requires specific removal before it’s safe to burn again. We photograph the flue interior and show you the difference. Call (866) 942-6061 for an inspection.
A loose or missing cap can usually wait through spring melt if the flue isn’t taking on water, but if you’re seeing interior stains or a draft, don’t wait. Water intrusion during freeze-thaw cycles does the most damage. Call (866) 942-6061 and we’ll tell you honestly which side of that line you’re on.
A camera inspection shows the condition of the smoke chamber, damper, flue joints and termination – the parts a sweep never sees. The photo report is a written record of what we found, which matters for insurance and real estate. Call (866) 942-6061 to schedule one.
When the flue is intact, the cap is seated, and there’s no creosote glazing, it’s safe to keep burning and revisit next season. We tell you plainly when work can wait. Call (866) 942-6061 for a free estimate either way.
If your chimney needs a look, call Tundra Chimney Sweep at (866) 942-6061 for a free estimate on chimney repair in Blaine. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. You’ll get a flat price agreed before booking, a camera inspection with a photo report, and a straight answer on what can safely wait.
Written by the team at Tundra Chimney Sweep.