Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Blaine, MN
Chimney inspection in Blaine, MN is what most of our calls start with. Blaine filled up fast in the 1990s and 2000s, which means thousands of homes in the 55449 ZIP now have factory-built fireplaces with metal flue systems reaching the age where sweep-and-inspect work matters more than masonry repair. Freeze-thaw cycles here are hard on caps and crowns, and glazed creosote builds quietly in flues that only see a few fires a season. Call (866) 942-6061 to book an inspection.
Why Blaine Homes Are Different
Walk through a Blaine subdivision and you’ll see the same house repeated with small variations: a two-story or rambler from the 1990s or 2000s, a prefab fireplace on the main floor, and a stainless flue liner running up an exterior chase. Generous lot sizes mean the houses sit far apart, and that changes the job. Drive time between addresses competes with time on the roof, so scheduling a day’s work in Blaine takes more planning than it does in a tighter grid closer to St. Paul.
The climate does the real damage. Long winters with heavy freeze-thaw cycling work on chimney caps, crowns and exterior flues, while spring melt and humid summers feed moisture and creosote problems inside neglected flues. Nothing on these homes is a masonry chimney that can absorb a little neglect. The flue is a sealed metal system, and when a joint or a cap fails, water and animals get in directly.
Permitting in Blaine runs through the city, and relining or structural work generally needs a permit pulled before anything goes in. If you live under an HOA, check the architectural rules before changing a cap or exterior termination. None of this is unusual. It just means the work has to be specified, not improvised.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Blaine Services
Two jobs account for most of what Blaine homeowners ask us about, and they’re closely related.
Chimney Sweep in Blaine
The signature Blaine job is the early-2000s two-story whose fireplace the original owners used a few times each winter. That light use is deceptive. Smoldering green firewood leaves glazed creosote that a quick brush won’t lift, and a flue that was never swept properly stays undersized-swept for years. We sweep the full flue, check the cap and screen, and remove the debris rather than pushing it down into the firebox. If you want the job done properly, book Chimney Sweep in Blaine and we’ll schedule it before the heating season gets going.

Chimney Repair in Blaine
Blaine’s freeze-thaw pattern finds the weak points. Caps crack, crowns spall, and exterior chase panels work loose after enough winters. Because these are metal flue systems, repairs are usually component-level: a properly fitted Famco or Gelco cap and flashing set, a failed section of liner replaced, a crown resealed. We specify the part and tell you why it fits. For liners, caps and flashing, we install what the system calls for rather than forcing a generic part. Schedule Chimney Repair in Blaine and we’ll assess what’s failed and what can safely wait.

Chimney Inspection in Blaine

Chimney inspection in Blaine is mostly about the generation of prefab fireplaces built between the 1990s and 2000s. These homes weren’t built with masonry chimneys that tolerate neglect. They have stainless or metal flue liners inside a chase, and the first real maintenance cycle lands around the same time the homeowner starts using the fireplace more seriously. An inspection tells you what condition that system is actually in, with evidence you can see. Our Chimney Inspection covers the firebox, flue, cap and exterior termination.
Fireplace Inspection
Signs you need it
You need a fireplace inspection if you smell smoke in the room when the fire is going, if the glass or firebox shows heavy soot, or if you’ve bought a Blaine home and don’t know when the fireplace was last checked.
What it costs in Blaine
A fireplace inspection in Blaine typically runs $125 to $250, with the written estimate setting the final figure.
How we do it
We inspect the firebox and refractory panels, check the damper and smoke shelf, run a camera through the flue, and confirm the cap and screen are intact before documenting the findings in writing.
Chimney Flue Inspection
Signs you need it
Call for a flue inspection if you’re seeing glazed, tar-like creosote on the flue walls, if the fire is hard to keep burning, or if a chimney fire has ever happened in the home.
What it costs in Blaine
A flue inspection in Blaine generally falls between $150 and $350 depending on access and camera work, and the written estimate confirms the price before we book.
How we do it
We insert a camera down the flue, record the liner condition joint by joint, photograph any glazing or cracks, and hand you a written report showing what the camera saw.
What Chimney Inspection Costs in Blaine
| Item | Typical range in Blaine |
|---|---|
| Standard inspection | $125 – $250 |
| Level 2 inspection with camera | $200 – $400 |
| Chimney fire damage assessment | $250 – $500 |
Nothing gets recommended without camera evidence in front of you.
Do I really need a Level 2 chimney inspection in Blaine?
A Level 2 inspection is worth it in Blaine when you’re buying a 1990s or 2000s home with a prefab fireplace, after a chimney fire, or after a liner change. It goes deeper than the standard look-over. Call (866) 942-6061 for an exact quote – estimates are free.
Can you inspect a chimney in Blaine the same day?
Often, yes. We routinely fit Blaine inspections into the same day when the schedule allows, and you’ll know the confirmed time when you book. Our technicians have up to 11 years of experience. Call (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Brands We Service in Blaine
We work with Gelco, Olympia Chimney, Famco and Copperfield components because these are professional-trade parts specified for cold-weather performance. We don’t claim to stock parts on a truck; we specify the right part, source it, and install it correctly. Turnaround depends on the component, and we’ll tell you the timeline upfront. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Blaine, MN
| Service | Typical range in Blaine |
|---|---|
| Standard chimney inspection | $125 – $250 |
| Level 2 inspection with camera | $200 – $400 |
| Chimney fire damage assessment | $250 – $500 |
| Fireplace inspection | $125 – $250 |
| Chimney flue inspection | $150 – $350 |
Blaine prices go up when access is difficult or when the flue needs camera work beyond a standard look-over. The written estimate pins the number before any work starts, so you’re not guessing.
Neighborhoods We Serve in Blaine
We cover the full spread of Blaine, from the older sections near the city core out to the newer subdivisions on the northern fringe. The 55449 ZIP and the tract-home neighborhoods east of Highway 65 see the bulk of the prefab fireplace work, simply because that’s where the 1990s and 2000s building happened. Lots are wide and houses are far apart, so we plan routes in advance. Response times across Blaine stay consistent because we book by area.
- The Lakes
- Club West
- Radisson Road corridor
- Lexington Avenue neighborhoods
- Northtown area
Service Area – Cities Near Blaine
Blaine sits on the northern metro fringe, and we serve the surrounding communities with the same sweep, repair and inspection scope. If you’re just outside Blaine, we cover Lino Lakes, MN, Mounds View, MN, Shoreview, MN and Vadnais Heights, MN. The same cold-weather conditions apply across all of them.
Serving Blaine, MN – Our Local Coverage Area
We serve Blaine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Blaine
We schedule Blaine visits within the dispatch window, Sunday through Friday, 7am to 7pm, usually within a few days of your call. Call (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm.
Relining and structural chimney work in Blaine generally require a permit pulled through the city before work begins. We’ll flag permit requirements when we assess the job, and HOA rules may add their own layer for exterior changes.
Yes. Alongside homes, we handle commercial chimney sweep, repair and inspection work in Blaine. The scope and pricing differ from residential because the systems and access do, but the process is the same: inspect, document, specify, then do the work.
Call (866) 942-6061 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Blaine Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Scott Parker"Showed up when they said they would. That's most of the battle."
- Allen Chen"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Doug Miller