Chimney Company in Stillwater - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 942-6061

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Stillwater, MN

Chimney inspection is the service Stillwater homeowners call about most, and this city gives us plenty to inspect. The historic downtown and the bluffs around it hold 19th-century brick and masonry chimneys built for wood and coal, many still lined with clay tile that’s cracked or spalled past the century mark. Freeze-thaw winters up here work on that masonry every year. We’re a chimney company that sweeps, inspects and repairs, and we specify every material for the cold a Stillwater flue actually sees. Call (866) 942-6061 to book a sweep. Our technicians have up to 11 years of experience.

Call (866) 942-6061

Why Stillwater Homes Are Different

Few cities in the metro have a housing stock this old sitting on terrain this steep. The Italianate and Queen Anne homes in the downtown historic district date from the 1850s to the 1900s, and their chimneys were built for wood and coal long before anyone worried about liner ratings. Many are clay-tile-lined, some were never lined at all, and a hundred-plus years of freeze-thaw has opened mortar joints and loosened brick faces. Water gets into a crack, freezes, expands, and spalls the brick from the inside out.

Then there’s access. Steep rooflines and tight lots on the hill mean chimney work here often calls for ladder staging or roof anchors you’d never need in a newer suburb. Heavy snow and ice on those pitches turn a routine sweep into a staged job. Meanwhile mid-century and newer builds on the bluffs and outskirts bring factory-built metal fireplaces that take different cleaning tools entirely. One ZIP code, 55082, holds all of it at once.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Stillwater Services

Two services cover most of what Stillwater homeowners call us about: getting the flue cleaned, and getting the masonry sound again.

Chimney Sweep in Stillwater

A sweep in Stillwater is rarely just a brush down the flue. On the older masonry chimneys in the historic district, we’re assessing liner condition and firebox integrity at the same time, because creosote removal tells you nothing about a spalled clay tile behind it. In the historic district we also run into sealed-off or repurposed chimneys that have to be cleared of nests and debris and capped before they can burn again. Book a Chimney Sweep in Stillwater and you get the flue cleaned and a straight answer on what the masonry underneath is doing.

Chimney Sweep in Stillwater

Chimney Repair in Stillwood

Freeze-thaw drives most of the repair work here. Water finds a failed mortar joint, freezes overnight, and by spring the crown and the brick around it are spalling. We repair crowns, mortar joints, flashing and caps, and we resurface deteriorated flue liners with HeatShield rather than tearing a chimney down to reline it. When a flue needs a new liner outright, a DuraFlex flexible system handles the oversized masonry flues common on the bluff. Request Chimney Repair in Stillwater and we’ll document what failed before we propose a fix.

Chimney Repair in Stillwood
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 942-6061

Chimney Inspection in Stillwater

Chimney Inspection in Stillwater

Chimney Inspection in Stillwater starts with the age of the house. A downtown chimney from the 1880s and a factory-built fireplace on a newer bluff build fail in completely different ways, and the inspection has to know which one it’s looking at. The freeze-thaw cycle here also means spring is prime inspection season: frost damage shows up in mortar joints and crowns that looked fine in October. Our Chimney Inspection documents the whole system in writing, which is what you want if a real estate transaction or an insurer is asking.

Fireplace Inspection

A fireplace inspection looks at the firebox, damper, smoke chamber and the first few feet of flue, the parts a fire stresses hardest.

Signs you need it

Smoke rolling into the room, a damper that won’t seat, or cracked firebox brick are the usual triggers, and any fireplace that’s sat unused through several seasons deserves a look before the first fire.

What it costs in Stillwater

A fireplace inspection in Stillwater typically runs $99-$250, depending on whether it’s a level one visual check or a camera-assisted look, and the written estimate sets the final price.

How we do it

We check the firebox for cracked brick and open joints, test the damper, look up the smoke chamber, and run a camera where the flue is accessible, then write up what we found.

Level 2 Chimney Inspection

A level 2 inspection adds a video camera run of the full flue, and it’s the standard when a home changes hands, an appliance changes, or a chimney has had a fire.

Signs you need it

Buying or selling a Stillwater home, switching from oil to gas, or a chimney fire at any point in the past all call for a level 2 rather than a visual check.

What it costs in Stillwater

Chimney Inspection Services at this level typically cost $150-$450 in Stillwater, with the price set by the written estimate and the camera run included.

How we do it

We scan the full flue with a camera, photograph every defect we find, check the crown, flashing and cap from the roof, and hand you the images along with a written report.

What Chimney Inspection Costs in Stillwater

Inspection pricing in Stillwater tracks the age and complexity of the chimney more than anything else. An 1880s masonry stack with a shared flue takes longer to assess than a factory-built fireplace on a newer build.

Item Typical range in Stillwater
Fireplace inspection $99-$250
Chimney flue inspection (camera) $150-$350
Level 2 chimney inspection $150-$450

Do I really need a camera inspection on an older Stillwater chimney?

Yes, if the chimney is masonry and predates the 1950s. Clay tile liners from that era crack and spall invisibly from the firebox, so a visual check from the top and bottom misses the failures a camera catches.

Can a chimney fire start without anyone noticing?

It can. Slow-burning chimney fires in a thick masonry flue can go unnoticed, and the damage shows up later as cracked tiles or a warped liner. If a Stillwater chimney has had one, a level 2 inspection is the starting point.

Brands We Service in Stillwater

We work with a curated roster of professional-grade chimney brands, including Gelco caps and flashing, Olympia Chimney components, Famco terminations and Copperfield products. We don’t stock parts locally; we specify the right component for your flue and source it. That keeps turnaround predictable on older Stillwater chimneys with non-standard sizing. See our brands for the full lineup.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Stillwater, MN

Service Typical range in Stillwater
Fireplace inspection $99-$250
Chimney flue inspection (camera) $150-$350
Level 2 chimney inspection $150-$450

What pushes inspection price up in Stillwater is the age and configuration of the chimney: a shared rowhouse flue in the historic district, an abandoned flue that needs clearing before it can be assessed, or steep-roof staging all add time. Our written estimate sets the final price before any work starts.

Neighborhoods We Serve in Stillwater

We inspect and service chimneys across Stillwater, from the downtown historic district up through the bluff neighborhoods and out toward the newer builds on the outskirts. Roof access on the hill often takes extra staging, so we plan for it when we book rather than on arrival. Here’s a look at where we work most:

  • Downtown historic district
  • South Hill
  • North Hill
  • The bluffs and outskirts
  • Nearby Lake Elmo

Service Area – Cities Near Stillwater

Stillwater sits at the center of our work in the St. Croix Valley, and we cover the surrounding communities from the same scheduling and the same material standards. If you’re just outside Stillwater, we likely serve your address. We also work in Lake Elmo, MN, North St. Paul, MN, Oakdale, MN and White Bear Lake, MN. Book a sweep for any of them with the same phone call.

Serving Stillwater, MN – Our Local Coverage Area

We serve Stillwater and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Stillwater

Ready to get started? Free estimates in Stillwater
Call (866) 942-6061

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Stillwater Customers Say

★★★★★ 4.9 from 11+ reviews

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Scott Parker

"Showed up when they said they would. That's most of the battle."

- Allen Chen

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

- Doug Miller

How It Works in Stillwater

Getting your chimney cleaning handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Stillwater. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7