G

Gelco Chimney Cleaning in Stillwater, MN

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Gelco Chimney Cleaning in Stillwater, MN

We provide independent Gelco service across Stillwater, from the historic district’s rowhouses to the bluff-top homes above town. The one thing that makes our Gelco work here different: we spend as much time on liner integrity and cap fit as we do on creosote, because Stillwater’s 19th-century masonry and shared flues fail in ways that newer construction doesn’t. If your Gelco liner or cap needs assessment, call (866) 942-6061. Our technicians have up to 11 years of experience, and we’re an independent shop, not affiliated with the manufacturer.

Call (866) 942-6061

Why Stillwater Residents Choose Us for Gelco Service

We’re not Gelco-authorized and we don’t claim to be. What we bring is hands-on familiarity with how Gelco components actually age in this town’s specific conditions: brittle clay tile behind flexible liners, freeze-thaw cycles that work at cap screws and gaskets, and bluff-side roofs that don’t allow a simple ladder setup.

Our technicians have seen the same Gelco components across the same era of Stillwater homes often enough to know where they fail. We match the part to the flue, not to a catalog page. When a component can be repaired or re-gasketed, we say so instead of pushing a replacement. And because our sweep, repair, and inspection work sits under one roof, you don’t have to coordinate three different tradespeople after a repair.

Scheduling is straightforward. We book a time, show up, and give you the field report with photos before we recommend anything. Call (866) 942-6061 to get on the schedule.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Solve in Stillwater

Gelco components fail in predictable ways, and Stillwater’s climate adds a few wrinkles. Here’s what we run into most often:

  • Liner seam separation in older flexible Gelco installations. Liner sections coupled together decades ago can develop gaps at the joints. Creosote and moisture migrate behind the liner, and the thinned walls can’t take the heat load they were rated for. In Stillwater’s cold winters, that moisture freezes behind the tile and accelerates spalling.
  • Corroded cap screws and mounting legs. Repeated freeze-thaw cycles pit the stainless at the fasteners first. The cap loosens in a high wind and lets rain and snow straight into the flue. Bluff-top homes catch more wind, so this shows up faster up there.
  • Hardened top-sealing damper gaskets. A Gelco damper gasket that has lost its pliability admits cold air and water through the winter. The water runs down and spalls the firebox crown, which is expensive to rebuild.
  • Rusted cap screens collapsing into abandoned flues. In the historic district, repurposed flues capped years ago often collect bird nests and debris. The cap screen rusts through and drops the whole load into the flue.
  • Cap screens blocked by debris and nest material. Reduced draft is the first symptom. If you smell smoke backing into the room, stop using the fireplace and have the flue assessed before lighting it again.

Gelco Service in Stillwater: What Local Conditions Mean for Your Equipment

Stillwater’s historic district has a lot of chimneys that are shared between adjacent rowhouses or that run internally through the structure. That single fact changes how a Gelco cap or liner on your flue behaves: a cap you replace can change the draft on a neighbor’s flue, and a liner gap behind one shared chimney can let water travel into the other side of the wall. Multi-flue cap fit matters here in a way it just doesn’t on a standalone chimney in a newer suburb. We approach every shared-chimney job with that in mind, checking both flues and fitting the cap so it serves each one correctly. If you’re in one of the 1850s-1900s Italianates along the historic blocks, this is almost certainly your setup.

Gelco Models & Products We Service in Stillwater

We work on the kinds of Gelco products that show up in homes across Stillwater: stainless flexible liner kits, single-flue and multi-flue chimney caps, top-sealing damper assemblies, and rain caps or spark arrestors for wood-burning flues. For each, we assess the component in place first, then choose whether to repair, re-gasket, or replace. When replacement is needed, we use quality parts rated for the same flue type and temperature as the original. We don’t claim to be an authorized Gelco dealer. We’re an independent chimney service that works on Gelco equipment and specifies parts that fit it correctly.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gelco Service Pricing in Stillwater

Chimney service is priced per job by written estimate. The estimate is free, and what comes back in writing is what you pay. What drives cost: access difficulty on steep bluff-side rooflines, whether a Level 2 camera inspection is needed, and whether parts replacement is involved versus simple cleaning or re-gasketing. We don’t recommend work without camera evidence you can see for yourself, and we say plainly when a repair can safely wait. Call (866) 942-6061 for an exact quote.

Serving Stillwater, MN – Our Local Coverage Area

We serve Stillwater and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gelco Chimney Cleaning in Stillwater

Service Areas Near Stillwater

We serve homeowners and property managers throughout the Stillwater area, including Stillwater proper and nearby communities. If you’re in Lake Elmo, North St. Paul, Maplewood, Oakdale, or Vadnais Heights, call to confirm coverage. We also work with Gelco components in Gelco homes across the region.

Book Your Gelco Service in Stillwater Today

Whether your Gelco cap needs re-gasketing or your liner needs a camera inspection, call us at (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and we document what we find in writing so you know exactly what condition your chimney system is in.

Written by the team at Tundra Chimney Sweep.

Need Chimney Cleaning help in Stillwater? Licensed & insured · free written estimates
Call (866) 942-6061
Local Service Coverage

Request a Free Estimate in Stillwater

Tell us what you need - Tundra Chimney Sweep responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7