HeatShield Chimney Cleaning in Maplewood, MN

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

HeatShield Chimney Cleaning in Maplewood, MN

We provide independent HeatShield service across Maplewood, and the one thing that makes our HeatShield work here different is what we find inside the chimneys: mid-century clay-tile flues that are now 50 to 70 years old, many built without a full-height liner at all. HeatShield is a cast-in-place flue resurfacing system, and it fits this housing stock well because it seals cracks and restores a continuous liner without tearing out the original masonry. If your Maplewood home has an original fireplace from the subdivision era, a Level 2 inspection is where we start. Call (866) 942-6061. We answer 24/7.

Call (866) 942-6061

Why Maplewood Residents Choose Us for HeatShield Service

Our technicians have up to 11 years of experience, and a good share of that has been spent on HeatShield applications in exactly this kind of housing. We know the product as an independent shop, not as anyone’s authorized dealer, and we say so plainly. We work with a curated roster of professional-grade brands, HeatShield among them, so the liner itself gets the genuine cast-in-place mix and the parts around it get specified for the job: dampers, caps, crown materials, flashing.

HeatShield Resurfacing System, HeatShield Rebuild, HeatShield Plus, and HeatShield Premium each solve a different problem, and picking the right one comes down to what the inspection shows. Before you book, we tell you what the sweep covers and what the inspection costs, and we don’t move to application until the price is agreed. That’s how a Maplewood homeowner ends up with a clear scope instead of a surprise. Sweep, repair, and inspection all sit with us, so there’s no separate inspector to coordinate after the work is done.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common HeatShield Chimney Cleaning Problems We Solve in Maplewood

Most of what we correct here comes from applications done over a flue that wasn’t ready, or from the building itself. These are the patterns we run into most.

  • HeatShield debonding over a dirty or wet flue. When resurfacing goes over a flue that wasn’t properly cleaned, or one with active water intrusion, the mix can let go and leave soft patches and voids that mirror the original cracked-tile pattern underneath. In Maplewood, an uncapped or badly flashed termination lets water in through the long freeze-thaw season, and that’s usually how it starts.
  • Top-seal shrinkage on rear-slope chimneys. Many Maplewood chimneys sit on the rear or side slope of low-pitched roofs and were built without a full-height clay liner. The HeatShield top-seal at the crown can shrink or crack when freeze-thaw cycles move the chimney, and flue gases then bypass the liner entirely.
  • Surface erosion at the smoke chamber throat. Older single-stage HeatShield jobs in hard-running wood fireplaces show erosion where creosote and moisture concentrate. Maplewood fireplaces run hard from November through March, and that sustained heating season is what drives the wear.
  • Thin shells in irregular flues. An improperly sized or over-thinned HeatShield mix leaves a shell that chips at the cleanout or damper frame, particularly where original mortar joints were spalling before resurfacing. Freeze-thaw cycling on exterior brick pushes that along.
  • Exposed smoke chamber and upper brick. In the older 55109 rambler subdivisions, the smoke chamber and top courses of brick often sit directly exposed to flue gases, a construction quirk inspectors flag constantly in mid-century Maplewood homes. That condition needs HeatShield Rebuild scope before a resurfacing will hold.

HeatShield Service in Maplewood: What Local Conditions Mean for Your Equipment

Maplewood’s 55109 housing was largely built out in the post-war 1950s to 70s boom, so what we open up is mostly mid-century brick and clay-tile flues. Not new-construction stainless, not the 1920s downtown stock a sweep sees in St. Paul proper next door. In those older rambler subdivisions, chimneys were frequently built without a full-height clay liner, so the smoke chamber and the upper courses of brick sit directly exposed to flue gases. For a HeatShield owner, that changes the scope of the job. A sweep-and-go won’t cut it. The work is inspect the aging liner, rebuild the smoke chamber where it’s needed, then resurface so the whole flue is continuous again. Add heavy snow on low-pitched rear-slope roofs and freeze-thaw cycling on exterior brick, and you get cracked crowns that let moisture in behind a liner that’s otherwise sound. That combination is why our HeatShield work in Maplewood leans toward Level 2 inspection up front and crown and waterproofing work on the back end.

HeatShield Models & Products We Service in Maplewood

We service the full range of HeatShield applications in Maplewood. The HeatShield Resurfacing System handles clay-tile flue repair where the original tiles are cracked but still in place. HeatShield Rebuild covers deteriorated smoke chambers and flue transitions, which is the scope unlined mid-century chimneys often need first. HeatShield Plus adds corrosion resistance in wood-burning flues that see sustained use. HeatShield Premium suits larger-diameter or irregular flue liners where a standard application won’t conform.

The liner itself calls for the proprietary HeatShield mix and tools rather than a generic refractory mortar, and we use the genuine product. Around it, we spec quality aftermarket dampers, caps, and crown materials so the system works as a whole. Whether you need a resurfacing or a full stainless liner is settled by the Level 2 inspection, and we tell you which and why. Our HeatShield work is documented in a written report you keep.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

HeatShield Service Pricing in Maplewood

HeatShield pricing depends on flue size, how much of the original tile is sound, whether the smoke chamber needs rebuilding, and how much crown and flashing work the chimney needs. A Level 2 inspection comes first and sets the scope. Every estimate is free, and the written estimate sets the final price.

Service Typical estimated range
Level 2 inspection (with camera and written report) $250-$450
Sweep, standard masonry fireplace $180-$340
HeatShield resurfacing, single flue $1,400-$3,200
HeatShield Rebuild, smoke chamber and transition $900-$2,400
Crown repair or rebuild $400-$1,200
Chimney waterproofing $300-$800

These are typical ranges for the Maplewood market, not quotes. The estimate sets the number. Call (866) 942-6061 for an exact quote – estimates are free.

Serving Maplewood, MN – Our Local Coverage Area

We serve Maplewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – HeatShield Chimney Cleaning in Maplewood

Service Areas Near Maplewood

We serve HeatShield customers in Maplewood and the surrounding communities, including St. Paul, South St. Paul, North St. Paul, Oakdale, and Vadnais Heights. If you’re in one of these towns, the same inspection-first approach applies.

Book Your HeatShield Service in Maplewood Today

Call (866) 942-6061 to book a HeatShield inspection or sweep in Maplewood. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. The estimate is free, and nothing is recommended without camera evidence you can see for yourself. If the work can safely wait, we’ll tell you that too.

Written by the team at Tundra Chimney Sweep.

Need Chimney Cleaning help in Maplewood? Licensed & insured · free written estimates
Call (866) 942-6061
Local Service Coverage

Request a Free Estimate in Maplewood

Tell us what you need - Tundra Chimney Sweep responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7