G

Gelco Chimney Cleaning Service in St. Paul, MN

Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Why St. Paul Homeowners Choose Gelco Chimney Cleaning

Tundra Chimney Sweep provides independent Gelco chimney cleaning and service in St. Paul, MN. We’re not affiliated with or authorized by Gelco. We’re an independent provider, and that independence is the point: we diagnose what’s actually wrong with your Gelco system and fix it with quality parts that fit, rather than steering every call toward a replacement. Our technicians have up to 11 years of experience, and they’ve learned how Gelco fireplace and flue systems fail in this city specifically.

Call (866) 942-6061

St. Paul’s housing stock makes that experience matter. Most of the city is 1890s – 1930s brick and stucco, from two-story four-squares to Victorian-era homes on the bluffs to the dense duplexes that define whole blocks. Many of those chimneys still run on original clay tile that has spalled after a century of freeze-thaw. Cleaning calls here routinely turn into relining evaluations in a way they rarely do in newer suburbs, and a Gelco system in that kind of chimney needs a technician who can read both the brand’s components and the masonry around them. As an independent Gelco service provider, we do exactly that.

Call (866) 942-6061. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.

Why Trust Tundra Chimney Sweep for Your Gelco Chimney Cleaning?

We know Gelco equipment because we work on it regularly, and we know what separates a correct repair from a temporary patch. A Gelco damper that doesn’t seat flat, a firebox whose mortar joints have opened, a cap that’s come loose on the top plate: each of these has a specific cause and a specific fix. Guessing at them wastes your money.

Our approach is what we call the Tundra standard. Every repair is specified for cold-weather performance, not just for how it looks in July. That means quality parts that match the original dimensions and draft tolerances of your Gelco equipment, installed so they hold up under five to six months of heating-season demand. Generic caps and dampers often fit poorly and leak, which is why we don’t use them on a Gelco chimney.

Service is also warranty-safe. We work on Gelco equipment without voiding coverage, and we document what we find and what we did so the record is clear if you ever need it. Sweep, repair, and inspection all happen under one roof, so you’re not coordinating a separate inspector after the work is finished. Your flue is a system, and we treat it that way.

Our technicians have up to 11 years of experience, and they bring that knowledge to every Gelco call in St. Paul.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Fix in St. Paul

Gelco chimneys in St. Paul tend to fail in a predictable order. Freeze-thaw winters work on the exterior while the heating season loads up creosote and soot on the inside. Here’s what our technicians see most often on Gelco systems across the city.

  • Rusted or seized dampers. Gelco damper pivots and tracks corrode and seize so the damper no longer closes flat. When that happens, heated air and smoke bypass the flue instead of going up it. You’ll notice smoke rolling into the room or a fireplace that never quite drafts right. Fitting the damper back into its track or replacing the hardware usually resolves it, but it has to be sized correctly to seat.
  • Cracked firebox brick and mortar. Repeated freeze-thaw cycles open the mortar joints in an unlined Gelco firebox, and once water gets in, the cracking accelerates each winter. Repointing the joints restores the firebox, but it’s a job for a qualified hand, not a caulk gun.
  • Deteriorated flue tile joints. In older Gelco chimney stacks, the mortar joints between flue tiles break down and gaps open. Those gaps let creosote and moisture into the masonry, and they’re a direct pathway for carbon monoxide. A Level 2 inspection with a camera is the only reliable way to find them.
  • Loose or corroded cap hardware. Gelco caps and top plates sit exposed to everything a Minnesota winter throws at them. Loose or corroded hardware lets water in and animals down the flue, and a cap that’s shifted off its top plate stops doing its job entirely.
  • Spalled masonry at the crown. A cracked crown feeds water straight into the flue structure and shows up as debris during a routine cleaning. Crown repair or coating is usually the follow-up step once the crack is found.

Each of these problems has a fix, and most of them cost far less when caught early. Here’s what we found and why it matters: a Level 2 inspection tells you the order things are failing in, so you can plan the work instead of reacting to it.

Gelco Parts & Our Repair-vs-Replace Approach

For Gelco damper, cap, and firebox components, quality parts that match the original dimensions and draft tolerances are the honest choice. Generic caps and dampers often fit poorly and leak, and a cap that doesn’t seal is worse than no diagnosis at all. We install parts that fit your Gelco equipment and hold up through the heating season.

When the failure is in the flue tile or the firebox masonry itself, repointing and relining usually cost less than a full rebuild. A qualified pro will tell you that plainly rather than push a tear-out. Our rule is simple: nothing gets recommended without camera evidence you can see for yourself, and if a repair can safely wait until spring, we’ll tell you so. That’s how we decide repair versus replace on every Gelco chimney in St. Paul.

If your Gelco damper won’t seal or your firebox mortar keeps cracking, call (866) 942-6061 and we’ll start with a diagnosis, not a sales pitch.

Our Gelco Service Process – Step by Step

  1. 1
    Diagnosis. We start with a Level 2 inspection and a camera run through the flue above the damper, so we can see the tile joints and firebox masonry directly. You get a written record of the system’s condition, which is also usable for real estate transactions and insurance requirements.
  2. 2
    Repair or install. Depending on what the camera shows, we repoint firebox mortar, free or replace seized damper hardware, reseat a loose Gelco cap and top plate, or apply crown repair where water is feeding the problem. Each step is explained before we do it.
  3. 3
    Test. We check draft, damper seating, and cap fit before we leave. A repair that hasn’t been tested isn’t finished.
  4. 4
    Warranty and documentation. Our work is warranty-safe, and we leave you with a written report of what was found and what was done, so your Gelco records stay complete.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gelco Products We Service & Install in St. Paul

We work on the Gelco components that matter most in a St. Paul chimney: prefabricated metal fireplace and flue systems, masonry firebox and damper assemblies, and chimney caps and multi-flue top assemblies. That covers the parts that take the most punishment from a Minnesota heating season. Sweeping clears the soot and creosote load, damper and firebox work restores function, and cap and top assembly work keeps water and animals out. If you’re unsure which Gelco components your chimney has, the inspection will tell you. Call (866) 942-6061 to book it.

We Also Service These Brands

Tundra Chimney Sweep works across the professional-grade chimney brands that cold-climate homeowners rely on, including DuraFlex liner systems and HeatShield flue resurfacing. We’re not tied to a single brand, which means your Gelco chimney gets the right fix rather than the one a particular manufacturer happens to sell. When a Gelco flue needs relining, DuraFlex or HeatShield may be the correct solution, and we’ll say so.

FAQs – Gelco Chimney Cleaning Service in St. Paul

Book Your Gelco Service in St. Paul, MN

Whether your Gelco damper won’t close, your firebox mortar keeps cracking, or it’s simply time for an annual sweep before the heating season, we’ll diagnose it honestly and fix it with parts built to last the season. Call (866) 942-6061 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Tundra Chimney Sweep.

Need Chimney Cleaning help nationwide? Licensed & insured · free written estimates
Call (866) 942-6061
Local Service Coverage

Request a Free Estimate in St. Paul

Tell us what you need - Tundra Chimney Sweep responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7