Fireplace Service Cost in St. Paul - What It Actually Costs, Explained

Honest local price ranges, and a straight explanation of why chimney quotes vary so wildly. We will also tell you when the work being pushed on you is not actually needed yet.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 942-6061

Flat price quoted before we book

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Much Does Fireplace Services Cost in St. Paul?

Fireplace services in St. Paul typically run $189 to $289 for a standard chimney sweep, $150 to $400 for a Level 1 or Level 2 inspection, and $295 to $650 for common masonry or cap repairs. Larger work, like resurfacing a deteriorated flue with a HeatShield system or installing a new DuraFlex liner, runs $1,800 to $6,500 depending on flue size, condition, and access. Every price here is an estimate for the St. Paul market; the written estimate we hand you after the inspection sets the final number.

We’re the team at Tundra Chimney Sweep, and we spend our heating season working on flues in a city that actually uses them. Fireplace work in St. Paul isn’t decorative maintenance. It’s a life-safety system check and a repair path, priced by what your flue actually needs. The ranges below come from the same professional-grade material lines we specify on the job every day.

Key Takeaways

  • A standard sweep in St. Paul runs about $189 to $289.
  • Inspection prices depend on level: Level 1 is the cheapest, Level 2 adds video scanning of the flue interior.
  • Most small repairs (caps, flashing, dampers) land between $295 and $650.
  • HeatShield resurfacing costs far less than full relining and is our first look when a clay liner is cracked or spalling.
  • Free estimates, and a written inspection report you can use for a real estate closing or an insurer.

Fireplace Services Cost Breakdown (2026)

Here’s the line-item picture for a typical St. Paul fireplace job. These are ranges, not quotes. Your flue’s size, height, liner material, and condition move the number up or down, and the estimate you get in writing is what you pay.

Service Typical 2026 Range What’s Included
Standard chimney sweep (wood-burning fireplace) $189 – $289 Flue brushing, firebox cleaning, damper check, creosote removal
Gas fireplace or insert service $149 – $249 Venting check, log and glass cleaning, combustion air check
Level 1 inspection $150 – $225 Readily accessible portions of the flue, firebox, and exterior
Level 2 inspection (video scan) $275 – $400 Full flue video, interior joints, liner condition, written report
Cap and flashing repair or replacement $295 – $650 New Famco or Gelco termination, flashing seal, animal guard
Damper repair or replacement $250 – $525 Hardware replacement, fit check, seal test
Masonry crown or mortar repair $400 – $1,200 Crown rebuild, joint repair, waterproofing touch-up
HeatShield flue resurfacing $1,400 – $3,200 Deteriorated clay liner resurfaced without demolition
DuraFlex flexible liner installation $1,800 – $6,500 New liner for a fireplace, gas insert, or conversion; insulation and cap
Oil-to-gas appliance conversion venting $3,200 – $6,500 DuraFlex system, termination, venting specification

What pushes a job toward the top of a range? Long flue runs on a tall St. Paul chimney cost more to line because the material runs longer. An offset in the flue means the liner has to flex through a bend, and DuraFlex handles that where rigid pipe won’t. A badly deteriorated clay liner moves you from the resurfacing column into the relining column. Damage to the crown and flashing found on the same visit adds a repair line you didn’t expect. Conversely, a clean flue with an intact liner and a topped-off cap is a sweep-and-go, and the estimate stays near the bottom of the range.

What Affects Fireplace Services Pricing in St. Paul

  • How cold the season runs. St. Paul homes burn wood through a long, hard heating season. A flue that sees heavy, prolonged use builds creosote faster and wears liner joints harder than a flue used a few weekends a year. That load shapes both how often you need a sweep and how quickly a repair becomes necessary.
  • Housing age and liner type. Many St. Paul homes still carry the original clay tile liner. Older clay liners crack and spall from sustained heat cycling, and that’s exactly where HeatShield resurfacing earns its place. A home already lined with a newer stainless system needs less.
  • Flue size and configuration. Oversized masonry flues and flues with an offset are the most technically demanding relining jobs. They take longer, need flexible liner systems, and cost more than a straight, standard flue.
  • What the appliance is. A wood-burning fireplace, a gas insert, and an oil or gas heating appliance each call for a different venting specification. Oil-to-gas conversions are a specific job we handle with DuraFlex because the new appliance’s venting has to match its rating, not the old flue’s.
  • What the inspection finds. The estimate is written after we look. A sweep that turns up a cracked crown or a loose cap adds a repair line. That’s not an upsell. It’s a field report you can read and act on.
  • Access and height. Roof pitch, chimney height above the roofline, and how easy the flue is to reach all change the labor. A steep roof and a tall stack take more time and care than an accessible one.

Notice that “brand” isn’t on that list. Price in this trade is set by condition and scope, not by a logo. We specify professional-grade parts, DuraFlex liners, HeatShield resurfacing, Gelco and Famco caps and flashing, Olympia Chimney and Copperfield components, because we’ve seen what survives a cold-weather heating season and what doesn’t. When we use one of those brands, we’ll tell you why in a line: it’s a better fit for the flue and the load.

When Does a Sweep Turn Into a Repair?

A sweep is the routine visit. A sweep becomes a repair when the same visit turns up a condition that will bite later. We don’t chase repairs for their own sake, but we do flag them plainly, and here’s the logic we work from.

Cracked or spalling clay liner. This is the most common repair path in older St. Paul homes. Instead of demolishing and rebuilding the flue, HeatShield can resurface the existing liner in place. That saves the cost of full relining and keeps the structure intact. Our HeatShield certification capability means we can resurface a deteriorated liner without the demolition a generalist might quote.

Damaged cap or flashing. A missing or loose cap lets water and animals in. Bad flashing leaks at the roofline. Properly fitted Gelco and Famco terminations are the fix, and it’s a modest repair compared to the water damage they prevent.

Wrong-sized or failing liner. An oversized masonry flue or a flue that’s failed outright needs a new liner. This is where DuraFlex flexible liner systems go to work, handling the bends and offsets that rigid methods can’t, and it’s the same expertise we bring to oil-to-gas conversions.

Crown and mortar wear. The crown at the top of the chimney takes the weather. Cracks there let water into the masonry through freeze and thaw. Repairing the crown early is far cheaper than rebuilding.

We handle sweep, repair, and inspection under one roof. You don’t get swept by one company and then handed off to a separate inspector to confirm the work. One visit can sweep, diagnose, and document.

How to Save on Fireplace Services

The biggest lever on fireplace service cost in St. Paul is not shopping around for a coupon. It’s catching repair conditions before they compound. A few practical points:

  • Get the sweep on a regular interval. Consistent sweeping keeps creosote from building to a level that forces expensive removal and lowers the odds the sweep turns up advanced liner damage. Routine cost beats repair cost.
  • Ask for the inspection during the same visit. Bundling an inspection into a sweep visit saves a separate trip. Because we do sweep and inspection together, that coordination is built in.
  • Fix caps and flashing early. Water intrusion is the costliest thing a neglected chimney does. A capped, flashed, water-tight termination costs a fraction of the masonry repair it prevents.
  • Prefer resurfacing when the flue allows it. If the clay liner is deteriorated but the structure is sound, HeatShield resurfacing is the lower-cost path over full relining.
  • Get the estimate in writing before work starts. The written estimate is what sets the final price. That way the inspection findings translate directly into a number you agreed to.

Estimates are free, so there’s no cost to finding out where your flue stands before something forces the issue. Call (866) 942-6061 for a free estimate on any fireplace service.

Why Material Choice Matters More Than Price in St. Paul

You can buy a fireplace service on the lowest number and still end up paying twice. The difference usually shows up in the materials. A low quote often means a generic cap, a generic liner, and a repair that doesn’t match the appliance or the flue geometry. Replace that in a year or two and the cheap job wasn’t cheap.

We work with professional-tier brands because they solve specific problems the cheap alternatives don’t. DuraFlex gives us a flexible liner that handles offset masonry flues and handles the demands of a conversion. HeatShield lets us resurface a clay liner without demolition. Olympia Chimney and Copperfield round out the liner and component side. Gelco and Famco handle the termination, the cap and flashing that sit in the weather. When we specify one of those brands, we’re matching the part to the flue and the cold-weather load, not cutting a corner.

That’s the standard we hold: work specified for cold-weather performance, built to last the season and the seasons after it. A flue is a system, and the cap, liner, damper, and firebox all have to hold together under sustained heating-season demand.

What a Written Inspection Report Gives You

Our inspection documents the system’s condition in writing, which matters in a few situations. If you’re buying or selling a house in St. Paul, a written report is the kind of documentation a real estate transaction or an insurer will want to see. If you’re a property manager, it’s a record of what was found and what was recommended. It reads like a field report, not a sales pitch.

How Bookings and Dispatch Work

We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. If you call outside dispatch hours, the call is booked into the next opening, Sunday through Friday, 7am to 7pm. We don’t quote extra for a same-day or urgent visit. The price is set per job by the written estimate, the same way it is for a routine sweep.

St. Paul customers call us with the same questions again and again, so here are the ones that come up most on cost.

FAQs – Fireplace Services Cost

How much does a chimney sweep cost in St. Paul?

A standard chimney sweep in St. Paul runs roughly $189 to $289. The number moves with the appliance type, how much creosote has built up, and accessibility. Call (866) 942-6061 for a free estimate on your specific flue.

How much does a Level 2 chimney inspection cost in St. Paul?

A Level 2 inspection with a video scan of the flue typically runs $275 to $400. A Level 1 inspection is cheaper, around $150 to $225. A Level 2 is the one to ask for when you’re buying a home or after a chimney fire. Estimates are free; call (866) 942-6061.

Is it cheaper to resurface the flue or replace the liner?

Resurfacing with HeatShield is usually the cheaper path: $1,400 to $3,200 versus $1,800 to $6,500 for a new DuraFlex liner. Resurfacing works when the clay liner is deteriorated but the structure is sound; full relining is the answer when it isn’t. The inspection tells us which applies. Call (866) 942-6061 for a free estimate and we’ll tell you which one your flue needs.

Can you come today?

Same-day service depends on the day’s schedule, but we dispatch from 7am to 7pm, Sunday through Friday, and we answer the phone 24/7. Call (866) 942-6061 and we’ll find the earliest opening for your fireplace service.

How much does a cap or flashing repair cost in St. Paul?

Cap and flashing repair or replacement typically runs $295 to $650, using properly fitted Gelco or Famco terminations. That’s far less than the water damage a failed cap or flashing causes. Estimates are free; call (866) 942-6061.

Does a fireplace service cost more in an emergency?

No. The price is set per job by the written estimate, whether it’s a routine visit or a same-day call. We don’t add emergency pricing. Call (866) 942-6061 and we’ll book you into the next opening, Sunday through Friday, 7am to 7pm.

Get a Free Estimate on Fireplace Services in St. Paul

Every number on this page is an estimate for the St. Paul market. Your flue’s actual condition decides the real total, and the written estimate after the inspection sets the price. Our technicians have up to 11 years of experience, we handle sweep, repair, and inspection under one roof, and we specify professional-grade materials from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield so the work holds up through a full heating season. Fireplace service in St. Paul is serious infrastructure work, and we treat it that way.

Call (866) 942-6061 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.

Written by the team at Tundra Chimney Sweep.

Pricing reflects the St. Paul market as of 2026. Tundra Chimney Sweep offers free estimates – call (866) 942-6061.

What Our Customers Say

★★★★★ 4.9 from 11+ reviews

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

- Scott Parker

"Showed up when they said they would. That's most of the battle."

- Allen Chen

"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."

- Doug Miller
Need Chimney Cleaning help in St. Paul? Licensed & insured · free written estimates
Call (866) 942-6061

Request a Free Estimate

Tell us what's going on in St. Paul. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7