Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Stillwater
If your chimney hasn’t been looked at in a few heating seasons, the right move is a proper inspection first, sweep second. In Stillwater, that matters more than in most towns. Our chimney sweep service covers the whole system – creosote removal, soot removal, firebox condition, liner integrity – and we document what we find with a camera so you can decide with your own eyes, not our sales pitch. We’re set up to reach Stillwater and the surrounding valleys, hilltop homes and riverfront blocks without the guesswork of a crew that’s never seen a bluffs-side roofline. Call (866) 942-6061 to book.
Why Stillwater Homeowners Call Tundra Chimney Sweep for Chimney Sweep
Stillwater has one of the older housing stocks in the metro, and it shows up in chimneys every week. Downtown you have 1850s-to-1900s Italianate and Queen Anne homes with brick stacks and clay-tile liners that have taken well over a century of freeze-thaw. On the bluffs and out toward the outskirts the picture shifts: mid-century builds and newer homes with factory-built metal fireplaces that need a completely different cleaning approach than masonry. We work both, and we don’t apply masonry techniques to metal boxes or the reverse.
The other reason homeowners here call us is trust around upselling. In a town full of old chimneys, it’s easy for a technician to recommend a liner before ever sliding a camera into the flue. We don’t do that. Every sweep includes a camera inspection, and any repair we recommend is tied to footage you can look at yourself. Our technicians have up to 11 years of experience, we work with professional-grade brands like HeatShield, DuraFlex, and Olympia Chimney, and we can tell you honestly when work can wait a season or two. That’s the whole pitch.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Fireplace Cleaning in Stillwater
Fireplace Cleaning in Stillwater means more than brushing the firebox – it means getting the whole flue path clear before you light the first fire of the year. A proper cleaning starts with a Level 2 inspection using a camera, then removes soot and creosote from the firebox and smoke chamber, checks the damper, and confirms the flue is actually sized for the appliance venting into it. In Stillwater, a homeowner usually needs it in fall before the burning season or in spring after frost damage. A typical fireplace cleaning in Stillwater runs $150-$280, and it’s often bundled with a sweep in a single visit.
What a Firebox Cleaning Actually Covers
We clean the firebox walls, smoke shelf, damper, and the top of the flue where creosote glazes, then document any cracks in the firebox masonry that could let heat reach framing. A firebox that’s been repurposed for a gas insert gets different treatment than one still burning wood.
Gas Insert Fireplaces
Gas inserts in Stillwater homes still draw soot and dust into the flue, and a masonry flue sized for wood may be oversized for a gas appliance, which changes how it drafts. We clean and inspect the venting system around the insert without pulling the unit unless the inspection calls for it.
Chimney Services in Stillwater
Chimney Services in Stillwater go well beyond sweeping – they include liner resurfacing, cap and flashing repair, crown work, and documentation for real estate or insurance. The most common need we see in Stillwater is a clay-tile liner that’s cracked or spalled after a century of freeze-thaw, letting creosote and moisture work into the surrounding brick. Where the liner is still structurally sound, HeatShield resurfacing can restore it without full demolition, which is often a fraction of the cost of relining. A typical Level 2 inspection in Stillwater runs $200-$375, and a full sweep with inspection falls in the $250-$450 range.
Camera-First Recommendations
Nothing gets recommended that isn’t visible on the camera footage we show you. If the liner is intact and just needs cleaning, that’s what we’ll say, even if a reline would be the bigger sale. When a repair truly can’t wait, you’ll see exactly why on the screen before we write up the estimate.

Cap, Crown, and Flashing Work
Missing or badly fitted caps are one of the top failure points in Stillwater’s older homes – rain gets in, freezes, and spalls brick from the inside out. We fit Famco and Copperfield caps and check the crown and flashing on every inspection, even when the roofline is steep enough to require roof anchors or staging.

Trusted Brands We Service in Stillwater
We specify and install proven components from professional-trade brands – HeatShield for flue resurfacing, DuraFlex for flexible liner systems, Olympia Chimney for venting components, and Famco for caps and terminations. These are the parts commercial contractors and full-service chimney technicians rely on because they hold up under sustained heating-season demand, not just mild conditions. We don’t stock parts; we source and install the right component for your specific flue. That means we can turn a camera-verified diagnosis into a specified repair with the correct materials, and you get a written scope rather than a verbal promise.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Stillwater Homes
- Clay-tile liners cracked by freeze-thaw. Water enters hairline cracks in the tile, freezes overnight, and spalls the surrounding mortar joints. A brush-only sweep never sees this – only camera inspection does.
- Abandoned or sealed-off flues in shared stacks. Many downtown rowhouse chimneys are party-wall stacks, and one side has been capped for decades. Cleaning one side when the other is full of bird nests and debris creates draft problems that don’t show up until the first fire.
- Gas appliances vented into oversized masonry flues. When an insert or gas appliance is fitted into a flue originally sized for wood, the flue runs cold and drafts poorly. It’s a common finding in 19th-century Stillwater homes that have had heating updates.
- Missing caps and damaged crowns on steep bluff-side roofs. Tight historic lots and steep rooflines mean some sweeps skip the crown and flashing check. Water intrusion from a failed crown is a top cause of accelerated masonry decay.
Pricing for Chimney Sweep in Stillwater, MN
Here’s what chimney work typically costs in Stillwater. An annual sweep runs $150-$280 depending on firebox size and creosote load. A Level 1 inspection is $150-$250, a Level 2 with camera is $200-$375, and a sweep bundled with inspection lands at $250-$450. Creosote removal and soot removal are included in the sweep when the buildup is standard; heavy glazed creosote may add to the scope and cost. Liner resurfacing with HeatShield and full relining with DuraFlex are quoted separately based on the footage we capture on camera. The written estimate sets the final price, and the estimate itself is free. We won’t tell you the liner needs replacing without showing you the reason.
We Also Serve Cities Near Stillwater
We serve homeowners in Lake Elmo, North St. Paul, Oakdale, and White Bear Lake, along with the rest of the Stillwater area. Same inspection standards, same camera-first approach, same brands. If you’re just outside the Stillwater line, call and we’ll confirm we cover your street before booking.
Serving Stillwater, MN – Our Local Coverage Area
We serve Stillwater and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Stillwater
Yes. Any flue that old warrants a Level 2 camera inspection before a brush goes in. Freeze-thaw cycles over more than a century routinely crack and spall clay tile in a way no exterior look can reveal, and a brush-only sweep leaves that damage undetected. Call (866) 942-6061 and we’ll book the inspection so you can see the liner condition on camera.
Yes, but it needs to be handled carefully. Shared party-wall stacks often have one flue sealed for decades and filled with bird nests, debris, or mortar fragments; cleaning the active side without clearing and capping the abandoned side can cause poor draft or smoke backup. We inspect both sides when access allows, document what we find, and recommend repairs only where the camera shows a real problem. Call (866) 942-6061 for a quote.
You can’t reliably tell from the firebox – third-degree creosote is glazed, hardened, and often hidden up the flue, so only a camera sweep confirms it. It’s the most dangerous stage because a chimney brush won’t remove it completely and it’s highly combustible. If we find it, we show you the footage and quote removal separately. Call (866) 942-6061 for an inspection.
Yes, factory-built metal fireplaces need different tools and inspection standards than masonry stacks. The flue is a metal liner with specific clearances, and the wrong brush can damage the liner surface. We clean both types in Stillwater and won’t apply masonry techniques to a metal box. Call (866) 942-6061 to book.
Spring is when freeze-thaw damage becomes visible – spalled mortar joints, cracked clay tiles, and water intrusion through failed crowns or flashing. It’s the season we recommend a camera inspection if you haven’t had one, because catching the damage before summer rains gets into the brick matters. A typical spring inspection in Stillwater runs $200-$375. Call (866) 942-6061 for a free estimate.
Whether you’re in a brick rowhouse downtown or a newer bluff-side build with a metal fireplace, the right starting point is a camera inspection and an honest assessment. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (866) 942-6061 for a free estimate and we’ll set up a time that works.
Written by the team at Tundra Chimney Sweep.